setting up a tm twin oe

**benny/9** · 24 May, 2015, 21:31

Originally posted by jc69817

Hi guys
ive just bought a tm twin flashed with the latest openvix image. I am a complete beginner and am keen to learn. Could anybody please help me with idiots guides to anything I can do to make the most of the box, right from the basic setup, putting my line on to anything to enhance me experience. including any software I may need.

many thanks guys

---------------------------------------------------------------
this is a guide from anouther forum

How to USB flash/upgrade Technomate TM-Twin-OE

1) Download your preferred image.
2) Format a USB stick FAT32 on your PC, leave the stick connected to your PC.
3) Power off your receiver, Via the rear rocker switch.
4) Extract the rar or zip file and copy the complete update folder to the root of your USB stick.
5) Now check the file structure on your USB stick. You should have update > tmtwinoe > cfe > image flash files inside this folder.
6) Remove USB stick from PC and connect to receiver.
7) Power on the receiver, when you receive the message on your TV screen press OK on the front panel.
8) Wait for the flashing process to complete, do not power off until the complete message is on your TV screen.
9) Once complete remove the USB stick, start repeatedly pressing EXIT button on front panel and keep repeatedly pressing EXIT for 10 seconds after power on.
**********************************************
after the box has been flashed go in to the box menu and click on pluggins
when this panel opens you then click>green to download more pluggins once
this completes you will find all you need for the extras you need to load to open
the channels,
*********************************************
as for help on emu's or lines etc: the rules dont allow any talk or help on this

setting up a tm twin oe

setting up a tm twin oe

Comment