static ip no internet connection

[father ted]

trying to do a tm 500 for the first time and am trying to up date the image,i have on the set up page an ip 192.168.xx.xx and i can put that into a browser and everything comes up and i can use the tools to move ,what am trying to do is put on a new image,with ftp it comes up sayin telnet not connected (so you cant see any files)and i cant put it into /temp folder
when i try to download from the server i get error 404 or 402 which is your not connected to the internet and at the bottom of the page it says static ip no internet connection ????

[dick b]

hello mate
I"ve got aTM500 and as I"m a bit useless in IT skills I found the best way of putting images in was via rs232 port.I found some images wont show internet connection even when you know its connected,I use the ur image dated 14/10/09 that does show everything and the down loads for add ons works ok.

[Manic01]

Ok you can downlaod latest image via the lan button. The issue you have is to ftp you need a password. The tm comes by default as user root and pass is blank. Use tcc to set a new pass.
Job done.

[father ted]

as you can see from picture ive tried it all still wont let me connect even done factory reset
i know its the right ip address i can web interface and a few other things

[Manic01]

Use tcc ver 6

[.: JaCkPoT :.]

All you have to do to fix the INternet prob is this, well so i have figured.
Hit the LAN Button.
Tick DHCP
Press RED/Save
Hit Lan button again
UNtick DHCP
Press Save
Now enigma will restart
You now have an IP andinternet connection as the box thinks

[alec]

The easier wayI find with a DM800 that Is connected to a router.
Shut down, pull the supply out . Hold the off button when you put the supply in and read the IP off the box LCD.
Use that on Internet exployer,with http:// before the numbers and let it find the box. Then just follow the instructions on the computer. Takes about 5mins.

[father ted]

ok ive got it all connected ok i can see it and partialy talk to it its not a TM image on it its some thing called dsteam cwipsy image? so i cant do what it says in digi's write up

ok draged out an old lap top and the now it seems to be flashing but dont ask me how cause ive not doen anything different

[Manic01]

Load another image on it by serial

[father ted]

ok finnaly got it flashed with newest image thank f*** nearly had on someone for help think the serial cable wasnt in rite tightened up the wee screws and away it went also changed laptops but nothing else changed so im not sure how it doen it now and would do it earlier

[father ted]

ok got the box flashed and have run a scan ,i found all the channles and used dbox edit to log onto it and sorted out bouquets and service files but as you can see from picture i still cannot connetc via DCC i have tried the newest version also tried 2.6 version