Beginer needs help with technomate 6800hd

[mooreand]

Hi to all
Please

Can any member of this community give me some info on what I can do with this box and where the information is to learn myself on how and what to do, to increase my enjoyment with it

thanks

[Devilfish]

I've uploaded the latest patch for you here...

http://www.digital-kaos.co.uk/forums/f75/technomate-6800hd-patch-29-09-08-a-9981/

Also check out the sticky threads at the top in red.

[mooreand]

Thanks will look at threads and get back , its all new takes time to get understanding

Thanks again

[.: JaCkPoT :.]

Im technomate addict. Ask me any questions and i shall answer. Willin to give you as much info as you need.

[mooreand]

Thanks
Sadiq

I will definetly contact you with loads of questions , over the coming weeks , As i am a complete novice to it,

thanks for your offer

oldman

[.: JaCkPoT :.]

your welcome mate, here to help

[ebunmiebun]

I have a huge problem with my technomd 6800Hd, i was trying to update it and it just stop working completely it did not respond to anything again.I was using usb pen. help please

[benny/9]

I have a huge problem with my technomd 6800Hd, i was trying to update it and it just stop working completely it did not respond to anything again.I was using usb pen. help please

**********************************
hi m8,
you will now need to do a forced download to clear the box,
first have you got a null modem cable?
this is how you do the forced download
*********************************
[1]download the darkman v187 loader panel from the forum
[2]download the patch. open the zip folder and get the patch out ready to load,
[3]connect the null modem cable from the com port on your computer to the rs232 port on the rear panel of your receiver
[4]turn the receiver off with the switch on the rear panel near the rs232 port
[5]open the v187 loader panel click and set it to software and download the panel usualy opens on this setting then browse button and find the patch on your computer and left click the patch then click open on the window
this will load the patch onto the loader panel
[6]click connect on the loader panel and when you see on the loader panel
[ connect your receiver and turn on] go to the receiver and turn it on with the rear panel switch and this will then force download the patch and clear the problem and load the patch now your receiver will work as normal again, after this you can use your memory stick for all the
software/patch/softcam/chn list programming again

[ebunmiebun]

thank you very much, i have not tried it yet but i can trust, whatever i get from here, but i do not know where to get darkman v187 loader panel

[benny/9]

thank you very much, i have not tried it yet but i can trust, whatever i get from here, but i do not know where to get darkman v187 loader panel

************************************************** ******
this is the way to clear your receiver mate, a lot who buy tm receivers dont load the first patch with the null modem cable and from the posts i see these are the users who have most problems with the box locking up
make sure if you dont have a cable you buy a null modem cable [female-female] plug ends these look solid with 9 pin holes in each plug. if you see 9 pins in one plug end this is a serial cable.this is the v187 loader you need for use with the cable on your model

[.: JaCkPoT :.]

Dont hesitate to use do the forced download.. It cant do anything... All the info on here is fully revised and always is before being put on the forums... We will not give any false info....
The forced download has saved many receivers to this day and will continue to do so... It is very handy but only for the new5000,1000 and 6000 supers and normals...
It does not work on the 3000,2000,7000,8000,9000 or the old 5000.

[ebunmiebun]

thank you, i am very pleased to be part of this community. however i tried to unzip darkman loader, but i got a message it is either unkown or corrupt.

[benny/9]

thank you, i am very pleased to be part of this community. however i tried to unzip darkman loader, but i got a message it is either unkown or corrupt.

************************************************** *****
hi m8,
i have just removed the v187 loader file and found it
downloaded and opened>ok i have reposted the file
give it anouther try

[.: JaCkPoT :.]

Downloaded here and works.. Try firefox..

[mooreand]

re downloads

Had loads of problems with downloads using Ie 7 use firefox after advise from benny no issues ever now. Great forum, had loads of help to get up and running. keep up the good work

mooreand