technomate 5400 super

[gothi]

hi eveyone just afte a bit of help.I havent done anything with the tm5400 since the premiers went off,how do you load these new phantom patches and soft cams,is bullsat still opening cheers gothi

[hoggy952]

patching with a usb stick
1. copy the latest technomate software & latest patch & latest softcam.

2. transfer Technomate software to receiver. (PIN code 0000) MENU -> USB -> Data Transfer -> select technomate file -> OK -> reboot.

3. Transfer patch to receiver. MENU -> USB -> Data Transfer -> select patch file -> OK -> reboot.

4.Transfer softcam to receiver. MENU -> USB -> Data Transfer -> select softcam file -> OK -> reboot.

5.Peform "Blind Scan" of desired satellite.

done.

[mdt]

,is bullsat still opening cheers gothi

at the moment there is quite a bit open via patch/softcam if you have access to a motorised dish.

bulsat=39e
arqiva=4.8e
orf=19.2e
austriasat=19.2e
tnt=19.2e
rai=13e
tvglobo=13e
mezzo=13e
sic-int=16e

about 15 b.i.s.s channels

n*k/s*t/t*2den and d*1+2 on 4.8e although i cant say if these are incorperated into the latest patches. thanks to phantom and others for keeping the non-lan capable stb,s up to date and giving us free tv , regards mdt

[Manic01]

Just to add there is no Phanthom , Its all from the koreans as usual.

[xfx]

phantom patch

hi does any body no what the latest phantom patch and softcam keys is for 5400 usb super
thanks

[dick b]

you will find the patches at Download center and softcam in the softcam section on this forum