using usb to rs232 on technomate solved

[neysean]

what you need:

.. usb to rs232 cable

.. rs232 cable

.. 9 pin female rs232 adapter ( if u need )


here what to do.

get the rs232 cable and find cables from pin 2 and 3 and 5 ( u may hav to cut the cable cover )

cut cable from pin 2 and 3 and conect it 2 to 3 and 3 to 2.

keep cable from pin 5 to pin 5

ok now
conect your usb rs232 cable to laptop and conect your homemade rs232 that you have done to your usb rs232 cable, ( you may need a 9 pin female adapter for that.)

done ...


the only cables u need from your rs232 are 2 , 3 and 5

thanks to mikiemo to remind me that wires 2 and 3 are crossed

'' do not cut your usb to rs23 cable''

hope it help ..

sorry for my bad english.

[KarolDIX]

Thank you, I was looking for this information.
5----5 GND
2----3 TX-RX
3----2 RX-TX
Now to work