Xprog M EWS adaptor

[pipmen]

@cjawahir: sorry but your answer has nothing todo with my questions. And why should I solder a USB plug to connect it to the EWS? I know that I can solder cables on it, but this was not my question regarding the EWS adapter.

[cjawahir]

@cjawahir: sorry but your answer has nothing todo with my questions. And why should I solder a USB plug to connect it to the EWS? I know that I can solder cables on it, but this was not my question regarding the EWS adapter.

in the pic i have a red circle you have to solder that point to pin 22 on the ews chip .

cj

[lupu_sandu]

Or on back of EWS (xprogM show u in Connection Diagram).
Video: [ame=http://www.youtube.com/watch?v=f8sQWFfjEcg]YouTube - EWS3[/ame]

[pipmen]

@cjawahir&lupu_sandu: THX GUYS!
Will do this and report you the result

[v-diag]

Hi

I have done one recently you have modify the board slightly will upload a image soon? It worked and have managed to program key with the dump using Abritus tag tool

[pipmen]

have done it! Hope it was successful I had to use a Powersupply for the X-Prog (I have used ones with 12V and 3A max.).

One question still remains. When I read the EWS there are three Fields which show strange values directly below the VIN-Field:

GM: FFFFFFFFP
SA: FFFFFFFFFFFFFFFFE
VA: FFFFFFFFFFF

What are these Fields GM, SA and VA showing?

[pipmen]

@v-diag: What do you mean? Did you programmed the keys?

I thought that it is not necessary to program the keys because they will be updated automatically if the EWS and the LCM are programmed correctly.