yes, your pin is correct. what target mileage you want?
yes, your pin is correct. what target mileage you want?
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
brend (14th February, 2023)
Yes, pin is correct. Think little bit before post.
Its immo2 here full immo
8D0 920 900 M
VIN XXXXXXXXXXXXXXXXX (no vin)
ID AUZ5Z0B2098043
LOGIN 02184
CS 121F3A607E92BA
KEY 1 445FB6FE
KEY 2 2E643AB4
KEY 3 445FB530
KEY 4 2E6437F5
Mileage 325791
Last edited by kiszka; 14th February, 2023 at 08:58 PM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
Sorry, i'm stupid, i see this was .bin from old KI, not new.
Now Attachments it's the .bin from new KI, the Mileway from this is 400935 km, but must have 325840 km, how i can change this?
The Seller give me Login 01292 for this KI, it's right?
Thanks very much for help.
Hi your new cluster pin is wrong. Correct one is 00626. If your adaptation with vcds is not sucessfull i can transfer your immo. I sent you on p.m your new cluster file with 325840KM. Share results.
VAG K+CAN Commander ask me this box, it's right? I didn't change this. The Cluster write 5 min, but not change the Mileage...
Last edited by pyromaniac; 15th February, 2023 at 04:31 PM.
Yes, because you dont write the file correct. here is writen on one of my test dashes. File is ok. Send me p.m.
Bookmarks