You can take a look at this
You can take a look at this
BR
KP
do you have inside view of edc16u34 ?
need close up of immo eprom forgot orientation
Hi
Read e2prom 95320 (8 pin soic) and post, for IMMO_OFF.
Regards.
gremlins are back again , car broke down yesterday and refused to start ,read with vagcom --- rom error
swapped ecu over removed immo eprom placed in new ecu
car still refuses to start ,engine blocked by immobiliser ???
eprom soldered securely
even conviced myself wrong way around but isnt unless someone has a close up of an edc16u1 eprom in circuit for orientation im stuck . really peed off tonight
I can take a pic tomorrow or you can upload a pic and I'll point to no1 pin...I could try to explain but really I need to see it to be sure..
Regards
Whatever seems impossible is just not yet important enough.
heloo
In |EDC16u1 is IC B57460 PHILIPS sop14. what is this?
B57460 = cd40106
So, is possible swap the edc16u1 to a edc16u32 directly???? Only immo off nad change the maps to work???
hi, can someone confirm if edc16u1 can be replaced by a edc16u34.
best regards
I had a car with broken EDC16U1 and I was unable to replace it with a EDC16U34, even after many tries cloning everything.
Finally I found a working EDC16U1 (this a difficult ecu to find, at least on my country)
After cloning eeprom and flash car worked without problem.
Sorry but in my knowledge EDC16U1 and EDC16U34 are NOT interchangeable.
I can confirm also that EDC16U1 and EDC16U34 are NOT interchangeable.
Bookmarks