Register
Results 1 to 6 of 6

Thread: sagem dbox

  1. #1
    DK Veteran mickyboy's Avatar
    Join Date
    Nov 2008
    Location
    paisley
    Posts
    524
    Thanks Thanks Given 
    8
    Thanks Thanks Received 
    4
    Thanked in
    1 Post

    Default sagem dbox

    ok ive followed aftermaths instructions on how to do dbox and when connecting dbox to computer via null cable i get this below ,,, anybody help oot



    Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
    Decrementer Frequency = 247500000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
    Console: colour dummy device 80x25
    Calibrating delay loop... 65.74 BogoMIPS
    Memory: 30888k available (1052k kernel code, 368k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (or
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module ve
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3d:a0:08
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    CFI: Found no D-Box 2 flash memory device at location zero
    D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
    Intel/Sharp Extended Query Table at 0x0031
    cfi_cmdset_0001: Erase suspend on write enabled
    Using buffer write method
    Creating 5 MTD partitions o
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "flfs (u-boot)"
    0x00040000-0x00800000 : "root (jffs2)"
    0x00020000-0x00800000 : "flash without bootloader"
    0x00000000-0x00800000 : "complete flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    cramfs: wrong magic
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000238: 0x1000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000002a4: 0x0040 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000049c: 0x1000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000538: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000630: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000068c: 0x0040 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000007c0: 0x0001 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000009dc: 0x0001 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a28: 0x0400 in
    stead
    Further such events for this erase block will not be printed
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x0010 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x0004 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0x0040 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002002c: 0x0040 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002004c: 0x0040 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020050: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020058: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020064: 0x0040 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002008c: 0x0004 in
    stead
    Further such events for this erase block will not be printed
    VFS: Mounted root (jffs2 filesystem).
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    Starting pid 11, console /dev/console: '/etc/init.d/rcS'ti-call b
    Chip reports voltage low
    Erase at 0x00000000 failed immediately: errno -5
    Using /lib/modules/2.4.31-dbox2/misc/event.o
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
    Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o
    Chip reports voltage low on erase: status 0xa8
    Erase at 0x00020000 failed immediately: errno -5
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
    ?debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
    debug: LCD init error -1
    debug: BMon V1.2 mID 03
    debug: feID 00 enxID 03
    debug: fpID 52 dsID 01-1d.a8.09.08.00.00-97
    debug: HWrev 61 FPrev 0.23
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
    debug: Got Block #0040

    will verify ELF image, start= 0x800000, size= 152952
    verify sig: 263
    Branching to 0x40000


    U-Boot 1.1.2 (TuxBox) (May 23 2004 - 21:44:01)

    CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
    Board: DBOX2, Sagem, BMon V1.2
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: ....... done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on nul
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    .................................................. .............
    Un-Protected 63 sectors
    ### FS (jffs2) loading 'vmlinuz' to 0x100000
    ### FS load complete: 619057 bytes loaded to 0x100000
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 618993 Bytes = 604.5 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Check
    Uncompressing Kernel Image ... OK
    Linux version 2.4.31-dbox2 (sportster@bar-wsl01) (gcc version 3.3.5) #21 So Jun
    19 18:44:54 CEST 2005
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
    Decrementer Frequency = 247500000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
    Console: colour dummy device 80x25
    Calibrating delay loop... 65.74 BogoMIPS
    Memory: 30888k available (1052k kernel code, 368k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT n
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3d:a0:08
    D-Box 2 flash driver (size->0x800000 mem->0x10000000
    CFI: Found no D-Box 2 flash memory device at location zero
    D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
    Intel/Sharp Extended Query Table at 0x0031
    cfi_cmdset_0001: Erase suspend on write enabled
    Using buffer write method
    Creating 5 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "flfs (u-boot)"
    0x00040000-0x00800000 : "root (jffs2)"
    0x00020000-0x00800000 : "flash without bootloader"
    0x00000000-0x00800000 : "complete flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    cramfs: wrong magic
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000238: 0x1000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000002a4: 0x0040 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000538: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000630: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000668: 0x0004 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000007c0: 0x0001 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000009dc: 0x0001 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a28: 0x0400 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000af8: 0x0400 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000ffc: 0x0400 in
    stead
    Further such events for this erase block will not be printed
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x0010 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x0004 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0x0040 in
    3: Console on framebuffer
    Sel
    steadtion
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002004c: 0x0040 in
    .................................................. .............
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000200c8: 0x4000 in
    ### FS (jffs2) loading 'vmlinuz' to 0x100000
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000200dc: 0x0040 in
    ## Booting image at 00100000 ...
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000200f0: 0x0001 ininux Kernel Image (gzip compressed)
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000200f8: 0x1000 in
    Load Address: 00000000
    Entry Point
    Mounted devfs on /devages.
    Freeing unused kernel memory: 60k init
    zone(2): 0 pages.
    Ke
    Starting pid 11, console /dev/console: '/etc/init.d/rcS'ti-call b
    Decrementer Freque
    Chip reports voltage low on erase: status 0xa8
    m8xx_wdt: active wdt found (SWTC: 0xFF
    Erase at 0x00000000 failed immediately: errno -5
    m8xx_wdt: keep-alive trigger ins
    Using /lib/modules/2.4.31-dbox2/misc/event.o
    Console: colou
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $librating delay loop... 65.74
    Buffer cach
    [i2c-8xx]: adapter: 01024 (order: 0, 4096
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
    Page-cache hash table entrie
    ?debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
    POSIX conformance testing by UNIFIX
    debug: LCD init error -1
    Linux NET4.0 for L
    debug: BMon V1.2 mID 03
    Based upon Swa
    debug: feID 00 enxID 03ciety NET3.039
    debug: fpID 52 dsID 01-1d.a8.09.08
    Initializing RT n
    debug: Transmitting BOOTP request via broadcastle version 2.6.1 (20010830)
    debug: Given up BOOTP/TFTP boot
    i2c-dev.o: i2c /dev entries dr
    boot net failedion 2.6.1 (2001

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    ttyS0 at 0x02
    Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
    debug: Got Block #0040 Unix98 ptys configure

    will verify ELF image, start= 0x800000, size= 152952n 0.2.dbox2 on SCC2, 00:50:9c:3d:a0:08
    verify sig: 263
    Branching to 0x400002 flash driver (size


    U-Boot 1.1.2 (TuxBox) (May 23 2004 - 2
    I2C: ready
    I
    DRAM: 32 MBtended Query
    FLASH: 8 MB031
    Scanning JFFS2 FS: ....... done.
    cfi_cmdset_0001: Erase suspend
    FB: readybled
    LCD: ready
    In: serial
    Using buffer
    Out: serial
    Err: serialeating 5 MTD
    Net: SCC ETHERNET 2 flash memory":

    Options:
    1: Console on null
    0x000000
    2: Console on ttyS0otloader"
    3: Console on framebuffer0x00020000-0x00040000 : "fl
    Select option (1-3), other keys to stop autoboot: 0x00040000-0x00800000 : "root (jffs2)"
    .................................................. .............ootloader"
    0x
    Un-Protected 63 sectorsomplete flash"
    ### FS (jffs2) loading 'vmli

    IP: routing cache hash table of 512 buckets, 4Kbytes
    Data Size: 618993 Bytes = 604.5 kB
    TCP: Hash tables configured (es
    Load Address: 00000000
    Entry Point: 00000000
    NET4: Unix domain so
    Verifying Checksum ... OK0.
    Uncompressing Kernel Image ... OKng magic
    jffs2_sc
    Linux version 2.4.31-dbox2 (sportster@bar-wsl01) (gcc version 3.3.5) #21 So Jun
    stead
    19 18:44:54 CEST 2005lock(): Magic bitmask
    On node 0 totalpages: 819202a4: 0x0040 in
    zone(0): 8192 pages.
    zone(1): 0 pages.
    stead
    zone(2): 0 pages.
    jffs2_scan_eraseblock(): Magic
    Memory: 30888k available (1052k kernel code, 368k data, 60k init, 0k highmem)
    stead
    jffs2_scan_era
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)0 in
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)agic bitmask 0x1985 not found at 0x00000538: 0x4000 in
    Mount cache hash table entries: 512 (or

    Further
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socketc bitmask 0x1985 not found at
    Starting kswapd00 in
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x
    devfs: boot_options: 0x1004: 0x0410 in
    JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
    stead
    jffs2_scan_
    i2c-core.o: i2c core module version 2.6.1 (20010830)2000c: 0x0004 in
    i2c-dev.o: i2c /dev entries driver module vestead

    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    CFI: Found no D-Box 2 flash memory device at location zeroask 0x1985 not found at 0x0002002c: 0x0040 in
    D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 no
    Intel/Sharp Extended Query Table at 0x0031
    cfi_cmdset_0001: Erase suspend on write enablederaseblock(): Magic bitmask 0x1985 not found at
    Using buffer write method
    Creating 5 MTD partitions o

    Linux video capture interface: v1.000k init
    mice: PS/2 mouse device common for all miceole: '/etc/init.d/rcS'ti-call b
    NET4: Linux TCP/IP 1.0 for NET4.0
    Chip reports
    IP Protocols: ICMP, UDP, TCP0xa8
    IP: routing cache hash table of 512 buckets, 4Kbytesediately: errno -5
    TCP: Hash tables configured (established 2048 bind 4096).o
    event: $I
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000630: 0x4000 in0020000 failed immediately: errno -5
    steadsing
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000009dc: 0x0001 in
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adap
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a28: 0x0400 in
    ?debug: DDF: Calibrating delay loop... debug: DDF
    stead6 Bog
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000af8: 0x0400 in init error -1
    debug: BMon V1.2 mID 03
    stead
    deb
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00 dsID 01-1d.a8.09.08
    debug: Transmitting BOOTP request via broadcast
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00002db0: 0x1000 int net failed

    Flash-FS bootstrap loader (v1.5)
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00003748: 0x0400 inund file /root/platform/sagem-dbox2/kernel/os in Flash-FS
    stead
    Further such events for this erase block will not be printed

    will verify ELF image, start= 0x800000, size= 152
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x4000 in
    Branching to 0x40000


    U-Boot 1.1.2 (TuxBox) (May 23 2
    stead2
    stead2
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000201ec: 0x0040 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000201f4: 0x4000 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020218: 0x0400 in
    stead
    Further such events for this erase block will not be printed
    VFS: Mounted root (jffs2 filesystem).
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    Starting pid 11, console /dev/console: '/etc/init.d/rcS'ti-call b
    Chip reports voltage low on erase: status 0xa8
    Erase at 0x00000000 failed immediately: errno -5
    Using /lib/modules/2.4.31-dbox2/misc/event.o
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
    Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o
    Chip reports voltage low on erase: status 0xa8
    Erase at 0x00020000 failed immediately: errno -5
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o

  2. #2
    The Stig PT mtv1's Avatar
    Join Date
    Apr 2008
    Location
    Tipperary
    Posts
    4,413
    Thanks Thanks Given 
    87
    Thanks Thanks Received 
    257
    Thanked in
    157 Posts

    Default

    so what you need a working image you could have just asked

  3. #3
    DK Veteran mickyboy's Avatar
    Join Date
    Nov 2008
    Location
    paisley
    Posts
    524
    Thanks Thanks Given 
    8
    Thanks Thanks Received 
    4
    Thanked in
    1 Post

    Default

    if you say so m8 a dont know anything about em

  4. #4
    V.I.P. Member Fergal's Avatar
    Join Date
    Aug 2008
    Posts
    1,007
    Thanks Thanks Given 
    1
    Thanks Thanks Received 
    4
    Thanked in
    3 Posts

    Default

    Have you actually flashed a image onto it using this
    http://www.digital-kaos.co.uk/forums...terminal-1531/

  5. #5
    Newbie
    Join Date
    Mar 2010
    Posts
    1
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    is there any other way to install new image rather than through hyper terminal?

  6. #6
    V.I.P. Member
    Join Date
    Jun 2008
    Posts
    1,091
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    3
    Thanked in
    3 Posts

    Default

    Quote Originally Posted by burnsy69 View Post
    is there any other way to install new image rather than through hyper terminal?
    ftp or ifa using network cable.......

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.