MPPS

**donesko** · 22nd May, 2011, 08:07 PM

Originally Posted by ecutuners

in 4.0.1.9 there is no problem with this as ive done many.

where can I see version?
Mine is sw.ver. 3.0.2.37 and mpps ver.4.03 ?

**donesko** · 22nd May, 2011, 08:12 PM

Originally Posted by michel34000

Be careful if edc16C39 mpps dump is not complete and calculating the checksum incorrect with mpps

with galletto, the dump is not complete but the checksum is correct
galletto or digiflasher

can I do it with cmd clone 3.1.0.1255 ?

**bazare** · 22nd May, 2011, 08:30 PM

yes BDM is the safe way.

**DaniXDX** · 23rd May, 2011, 03:36 AM

Hello.

I found a different v5.0.1.10 original software. Who will test?
The original .exe (1mb) an this exe (9mb).

setup mpps 5.0.1.10.rar

**moky** · 23rd May, 2011, 06:08 AM

this is cracked update software,seems work if you have key !

**DaniXDX** · 23rd May, 2011, 10:15 AM

MEGAUPLOAD - The leading online storage and file delivery service

**ecutuners** · 23rd May, 2011, 11:38 AM

is no good without the key cant test

**stk90** · 23rd May, 2011, 11:43 AM

Originally Posted by ecutuners

is no good without the key cant test

That version needs to run a reg file.

This file is based on the identification of the components of computer

It 's impossible to generate the reg. files without the dedicated keygen.

**fifas2010** · 23rd May, 2011, 11:47 AM

Hello everyone,
Since I upgraded my smps to version 5.0.1.10, with this software posted DaniXDX our friend, the software opens but kept the information to clone):
I read a file and read edc16c34 ecu is only 59, Kb?
and read at the end says it's a clone):
will read the file ok? not tried to write the ecu yet!

**stk90** · 23rd May, 2011, 11:55 AM

Originally Posted by fifas2010

Hello everyone,
Since I upgraded my smps to version 5.0.1.10, with this software posted DaniXDX our friend, the software opens but kept the information to clone):
I read a file and read edc16c34 ecu is only 59, Kb?
and read at the end says it's a clone):
will read the file ok? not tried to write the ecu yet!

Have you locked your clone .....

Can still be unlocked without desoldering

**rsibiza** · 23rd May, 2011, 12:00 PM

Originally Posted by fifas2010

Hello everyone,
Since I upgraded my smps to version 5.0.1.10, with this software posted DaniXDX our friend, the software opens but kept the information to clone):
I read a file and read edc16c34 ecu is only 59, Kb?
and read at the end says it's a clone):
will read the file ok? not tried to write the ecu yet!

recognosed as clone by serial and hardware..now work only as slave and you must send your file to amt cartech,to get an file which is packed to use with mpps now,....

**DaniXDX** · 23rd May, 2011, 12:02 PM

Originally Posted by stk90

That version needs to run a reg file.

This file is based on the identification of the components of computer

It 's impossible to generate the reg. files without the dedicated keygen.

But this version dont brick the clone, no?

Thanks

**michel34000** · 23rd May, 2011, 12:05 PM

Originally Posted by stk90

That version needs to run a reg file.

This file is based on the identification of the components of computer

It 's impossible to generate the reg. files without the dedicated keygen.

Who Can Generate the reg files and please can it work with no matter what number MPPS
Thank you for your reply

**stk90** · 23rd May, 2011, 12:05 PM

Originally Posted by DaniXDX

But this version dont brick the clone, no?

Thanks

If you have not been changed by some funny guy no ......

I think it has stuck with the original sw also because what you posted you just will not start without a license