MPPS

**bazare** · 17th May, 2011, 08:39 AM

Maybe edc16c35 work ok on table. Will have to check because i tried only in car.

**moky** · 17th May, 2011, 11:03 AM

just received clone V5.0.1.10 work with original software,work fine,will test on differents cars,i will tell you..

**autochampion1** · 17th May, 2011, 11:36 AM

Originally Posted by moky

just received clone V5.0.1.10 work with original software,work fine,will test on differents cars,i will tell you..

Tell whence has ordered? It is possible in PM

**moky** · 17th May, 2011, 12:13 PM

Mine tested rapidly on edc15 (tdi ) Kline RW ok
Tdci 1.6 edc16 Can RW ok
in week i will test on bmw edc16 c35 but i think work same as original.i will tell you news about

.

**rsibiza** · 17th May, 2011, 04:52 PM

Did anybody encounter problems on k line? No id no read no write?

I have replaced mcu,lm339 etc...etc... Same as well...

No communication

Any explaintions or solutions for?

Any help apreciated.

**robertop** · 17th May, 2011, 04:54 PM

Originally Posted by rsibiza

Did anybody encounter problems on k line? No id no read no write?

I have replaced mcu,lm339 etc...etc... Same as well...

No communication

Any explaintions or solutions for?

Any help apreciated.

Reflash the mcu.

**rsibiza** · 17th May, 2011, 05:58 PM

Originally Posted by robertop

Reflash the mcu.

Does not help,flashed with new dump...replaced mcu and reflashed....nothing..

replaced lm339,nothing...exchanged all smd ic etc on pcb...

**robertop** · 17th May, 2011, 07:58 PM

Originally Posted by rsibiza

Does not help,flashed with new dump...replaced mcu and reflashed....nothing..

replaced lm339,nothing...exchanged all smd ic etc on pcb...

You need other hex for reflash or other micro...

**Tereksaz** · 17th May, 2011, 08:08 PM

Originally Posted by rsibiza

Did anybody encounter problems on k line? No id no read no write?

I have replaced mcu,lm339 etc...etc... Same as well...

No communication

Any explaintions or solutions for?

Any help apreciated.

HC32 -replaced?

**mishu_b** · 17th May, 2011, 08:15 PM

I'm facing now with one similar problem that means no K line ECU find.

than I changed the HC32 - with other problem - found ECU ID than start read, after some % read out I received one error with spot the read.

what can you propose for this issue?

all the best!

**blacktoy** · 17th May, 2011, 10:16 PM

where can i buy a v5 clone?

i had a 4.019 clone and it worked great on different cars (EDC15,16,ME7)

**drakov** · 17th May, 2011, 10:49 PM

Originally Posted by noriginal

only sell, never help in this forum
received more msg pm in private for upgrade my mpps for 100 euro

this is a joke?

send me a pm with list of all members who pm'd you to sell

**rsibiza** · 18th May, 2011, 11:35 AM

Originally Posted by Tereksaz

HC32 -replaced?

Yes HC32 also replaced,crosschanged from a working one,the same dump just work fine on another mpps,same build..V3 plastick OBD housing...

**rsibiza** · 18th May, 2011, 11:37 AM

Originally Posted by mishu_b

I'm facing now with one similar problem that means no K line ECU find.

than I changed the HC32 - with other problem - found ECU ID than start read, after some % read out I received one error with spot the read.

what can you propose for this issue?

all the best!

What ecu did u ID fine? but not read? Brand?