EDC17U01 OBD to BDM after failed obd flash

[ch0ngin]

hi

as title suggests i have failed obd flash to EDC17U01

OBD write over K-Line
now need to write BDM over CAN..

BDM is 1.5mb map + eeprom
OBD is 2.0mb complete but won't write to BDM..

here is full obd read backup and messed up bdm won't detect k-line

i need full BDM image to restore k-line functionality..

hope you can help thanks

[cbvasoft]

When you save dump with ktag , save separatly not full dump. After put here I will covert for you .

[ch0ngin]

in zip read from bdm

[bogdanwmw]

pcmflash work on this ecu OBD !

[volodin69]

Is not my file. Is from another colleague. Pcm flash read.

[sebol1204]

Do you have full bdm/boot read from working ecu (your ecu)? Or you have only partial read (via obd)?
If you give me ori readed by obd and broken read from bdm/boot i make working file.

MED(C)17 have OTP sectors

[ch0ngin]

Do you have full bdm/boot read from working ecu (your ecu)? Or you have only partial read (via obd)?
If you give me ori readed by obd and broken read from bdm/boot i make working file.

MED(C)17 have OTP sectors

thanks yes thats what i need.. i read that copy crypto from 14000-17FFF and checksum..

however i tried to edit and failed... hence the need for assistance..

Edit. my ktag now says operation not allowed now when try to write just micro(mpc)

I ended up using fgtech v54 without problem.
Also rebuilt bdm Mpc with my 14000-17FFF OPT area info.
fgtech/ktag do checksum.
solved….

[sebol1204]

Write this file

[ch0ngin]

Write this file

wrote fgtech int fl.
still no ecu detected..

[peechie]

Pcmflash original has VR and can restore completely bricked EDC17.

Once i bricked EDC17CP14 with MPPS, ECU not found. VR with Pcmflash fixed it as its complete FRF files...

[ch0ngin]

sorted fixed ecu detection by using my original (OPT AREA 14000-17FFF) on a replacement dump.

full BDM FGTECH/KTAG..