Kia Shuma 1998 im*o problems

**cristi_onofrei** · 14th March, 2010, 05:07 PM

KIA Shuma 1.5 L DOHC engine 1998
ECM Siemens K103735112A K2AC
MCU TMS374, EPROM 28F512

I need solution for "im*o off" because im*obilizer forget keys every time after turn off engine

I try many clock files for 28f512 ->

I try to read TMS374 with X-Prog M ->

I get out from board and try to read TMS374 with ETL TMS programmer ->

I

Any solution for this car?

**cristi_onofrei** · 30th March, 2010, 08:13 AM

any news???

**PAVLOS2** · 30th March, 2010, 08:50 AM

USE THIS FILE FOR 28F512 ITS IMMO OFF CUT ECU PIN NUMBER 6,DISCONECT IMMOBOX FROM CAR
AND ONE MORE THING YOU HAVE TO FIX ENGINE BLOWER WITH A MANUAL THERMOVALVE CAUSE ITS GOING TO RUN AT ALL TIMES AFTER THE USE OF THIS FILE

**cristi_onofrei** · 30th March, 2010, 01:24 PM

Thank you!!!!
I will try today

**cristi_onofrei** · 30th March, 2010, 08:19 PM

Thank you very, very much!!!!!
Work like you say!

**konialex** · 6th August, 2010, 04:02 PM

Originally Posted by PAVLOS2

USE THIS FILE FOR 28F512 ITS IMMO OFF CUT ECU PIN NUMBER 6,DISCONECT IMMOBOX FROM CAR
AND ONE MORE THING YOU HAVE TO FIX ENGINE BLOWER WITH A MANUAL THERMOVALVE CAUSE ITS GOING TO RUN AT ALL TIMES AFTER THE USE OF THIS FILE

Hello averyone. I have a problel like the above and I need disable the immobilizer.
Do I need to cut the pin number 6 or I just have to disconnect the immo unit?
Do I need a spesific program to run this file?
Thanks.

**Elektrik001** · 29th September, 2011, 06:04 PM

Originally Posted by PAVLOS2

USE THIS FILE FOR 28F512 ITS IMMO OFF CUT ECU PIN NUMBER 6,DISCONECT IMMOBOX FROM CAR
AND ONE MORE THING YOU HAVE TO FIX ENGINE BLOWER WITH A MANUAL THERMOVALVE CAUSE ITS GOING TO RUN AT ALL TIMES AFTER THE USE OF THIS FILE

Thank you very much! This file is also compatible Hyundai Lantra 1999 16.16V
ECU: HEI H103955555A 39100-23746 39110-23746
I just tested it and works 100% including engine cooling fans!

Thanks thanks thanks!

**Romanky** · 2nd April, 2012, 01:32 PM

Also here is a 1999 Hyundai Lantra 1.6.16V
ECU: 39100-23746 39110-23746 HEI H103955555A Ecu of the same, so I pull 28F512 flash reprogram the Clock and the ladies in the car and do a loop for 1 minute. Then coming back the original content and it will go to start? Immo pin is also at pin 6. ? Please practice or guidance on how to do it?

**Romanky** · 3rd April, 2012, 07:00 PM

So I programmed the clock files for 28f512 and gasoline pump OK, but not start Hyndai Lantra 1.6 16V 1996 years.

SHUMA DOHC SIEMENS K103735112 B 28F512 IMMO OFF CKSM EA77.rar (26.6 KB, 194 views)

Immo box is disconnected !

ECU: 39100-23746 39110-23746 HEI H103955555A

I do not know what I'm doing wrong here when a colleague tried

and it worked OK! Can anyone help ?

**Romanky** · 3rd April, 2012, 07:12 PM

SHUMA DOHC SIEMENS K103735112 B 28F512 IMMO OFF CKSM EA77.rar (26.6 KB, 194 views)

Immo box is disconnected !

ECU: 39100-23746 39110-23746 HEI H103955555A

I do not know what I'm doing wrong here when a colleague tried

and it worked OK! Can anyone help ?

NO not ! http://pl112637826.trustpass.alibaba...ATOR_IMMO.html

**Romanky** · 7th April, 2012, 07:55 AM

Yes indeed solved dump operation, I had a bad tin plate brazed ceramic transistor in the spark. Because I changed the transistors and ceramics to be another ECU.