Doblo 2010 remote problem

[Manta1600]

Doblo 2010 but still id48 with separate remote

I programmed 2 second hand remotes with 1 button with SmartPro and the car accept them but the procedure end with fail

when I go on live data every time when I press some of the remotes its change the remote ID so the car see both of them

I programmed the remotes with the immo pin code but maybe this one need separate pin for the remotes as old Ducato

or maybe I'm missing something else

[Ecuprog31]

Doblo 2010 it’s 2 or 3 button remote
same as nemo / bipper
I think 1 button end on 2005 year

[Faraday]

Pin is the same for remote and immo part.

[wuza]

If you have other tool that can also learn remote, try it.
Did had Alfa 147 the other day and with MES was OK.
Other tools could not do the job…

[pepi]

Last time I did the job with Avdi at this brand.

[Manta1600]

Doblo 2010 it’s 2 or 3 button remote
same as nemo / bipper
I think 1 button end on 2005 year

Nemo and Bipper use id46 never saw with id48

[Manta1600]

If you have other tool that can also learn remote, try it.
Did had Alfa 147 the other day and with MES was OK.
Other tools could not do the job…

Tried also Autel without success

[Manta1600]

will try it

[Faraday]

MES work ok with this car. Are you sure that this car is equipped with remote control. This might be coding problem.

[Manta1600]

MES work ok with this car. Are you sure that this car is equipped with remote control. This might be coding problem.

for sure is with remote as there is not lock on the passenger door

also live data show that there is already programmed one remote and show the ID of the remotes when I press some of them

I don't have MES but will download the free version to see what can do

[Manta1600]

So today I fail also with AVDI and with MES

and remembered that I read something about this in the past in this thread

https://www.digital-kaos.co.uk/forum...te-key-for-car

looks like the remote is synchronised with the chip as on the old Renault PSA with separate chip

and if you don't have new dealer remote key you can't program remote

the good news is that on the live data on the SP you can see the remote ID and don't need the BCM from the car that the remote come to read it