Vectra C Airbag B1000 error
Register
Page 1 of 2 12 LastLast
Results 1 to 15 of 23
  1. #1
    Newbie
    Join Date
    Oct 2009
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Default Vectra C Airbag B1000 error

    Hi, one friend have an Opel Vectra C (ModelYear 2002) with airbag light on.

    OP-COM says:
    Code:
    OP-COM 081016  - PC based diagnostic tool
    OP-COM - CAN Communicaton  Window> 2002|Vectra-C / Signum|Body|SDM (Airbag)
    
    Read  Info...
    
    Identifier: 0x0001
    Part Number:13118804
    Software  version number: 00BA845C
    System description: DELCO0400
    Alpha code:  AQ
    Manufacturing date: 020308
    
    
    Total number of fault  codes:  1
    
    B1000 - Replace Electronic Control Unit (ECU)
    (00)  -  Present
    Can I use airbag resetter (clip) to clear SDM-ecu?

    Thanks in advance.

    P.D.: Car don?t have any crash.
    Last edited by djbill; 15th March, 2010 at 11:32 AM. Reason: Car status

  2. #2
    V.I.P. Master of the IMMO
    lupu_sandu's Avatar
    Join Date
    Jul 2009
    Location
    In my immobox...
    Posts
    6,323
    Thanks
    752
    Thanked 3,617 Times in 1,854 Posts
    Downloads
    23
    Uploads
    0

    Default

    Use OPCOM090821d and use function Clear Deployment Data. Maybe this will work.

  3. #3
    Newbie
    Join Date
    Oct 2009
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Default

    Thanks, i will try this.

  4. #4
    DK Veteran wizz2c's Avatar
    Join Date
    Dec 2009
    Location
    earth
    Posts
    649
    Thanks
    37
    Thanked 114 Times in 18 Posts
    Downloads
    22
    Uploads
    0

    Default

    Quote Originally Posted by djbill View Post
    Thanks, i will try this.
    just crash data stored by the looks of things, you can erase with opcom
    Dont forget to say if i helped.

  5. #5
    Newbie
    Join Date
    Oct 2009
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Default

    what do you think about this error (B1000) on airbag ecu?

  6. #6
    DK Veteran
    teerak2uk's Avatar
    Join Date
    Apr 2009
    Location
    East Anglia
    Posts
    4,954
    Thanks
    1,137
    Thanked 1,037 Times in 750 Posts
    Downloads
    110
    Uploads
    0

    Default

    i thought to clear crashed data from the module which normally locks you need to do it via the chip on the board not obd connection
    Oh and by the way if my post has been at all helpfull
    please press the little THANKS tab

  7. #7
    DK Veteran
    Jose19's Avatar
    Join Date
    Nov 2009
    Location
    From the HELL
    Posts
    854
    Thanks
    124
    Thanked 104 Times in 59 Posts
    Downloads
    13
    Uploads
    0

    Default

    Quote Originally Posted by teerak2uk View Post
    i thought to clear crashed data from the module which normally locks you need to do it via the chip on the board not obd connection
    Yes , you are correct!!
    Read dump file

    Jose

  8. #8
    DK Veteran
    z786's Avatar
    Join Date
    Aug 2009
    Location
    10 Steps Ahead of You
    Posts
    4,847
    Thanks
    206
    Thanked 111 Times in 72 Posts
    Downloads
    25
    Uploads
    0

    Default

    Quote Originally Posted by teerak2uk View Post
    i thought to clear crashed data from the module which normally locks you need to do it via the chip on the board not obd connection
    you can clear most of the vauxhalls with op-com via obd
    "I always tell the truth. Even when I lie"




    "We Taking Over, One City At A Time"

  9. #9
    Top Poster
    Join Date
    Dec 2009
    Posts
    119
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Downloads
    41
    Uploads
    0

    Default

    hello
    do you have solve the b1000 problem, i have the same

    best regards

  10. #10
    Newbie
    Join Date
    Oct 2009
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Default

    No, sorry.

    You need flash clear crash file on chip. Maybe Airbag resetter will work but i don't know.

    Regards.

  11. #11
    DK Veteran
    Shmortz's Avatar
    Join Date
    Apr 2010
    Location
    in the middle of nowhere
    Posts
    3,025
    Thanks
    178
    Thanked 908 Times in 720 Posts
    Downloads
    62
    Uploads
    0

    Default

    Hi, I have the same problem, there is also error on other modules that is no connection with airbag module, after clearing the dump of 95040 airbag light goes out for some seconds and then back on, in the time that the light is not on the diagnostic connection is possible, after that module dies again, when turn ACC off and on again in a minute or two the module lives again for some seconds and dies...

    I need full flash of the processor 0K75F (912D60) to compare with my one

  12. #12
    DK Veteran
    teerak2uk's Avatar
    Join Date
    Apr 2009
    Location
    East Anglia
    Posts
    4,954
    Thanks
    1,137
    Thanked 1,037 Times in 750 Posts
    Downloads
    110
    Uploads
    0

    Default

    Quote Originally Posted by Shmortz View Post
    Hi, I have the same problem, there is also error on other modules that is no connection with airbag module, after clearing the dump of 95040 airbag light goes out for some seconds and then back on, in the time that the light is not on the diagnostic connection is possible, after that module dies again, when turn ACC off and on again in a minute or two the module lives again for some seconds and dies...

    I need full flash of the processor 0K75F (912D60) to compare with my one

    what is the part number from the module
    Oh and by the way if my post has been at all helpfull
    please press the little THANKS tab

  13. #13
    DK Veteran
    Shmortz's Avatar
    Join Date
    Apr 2010
    Location
    in the middle of nowhere
    Posts
    3,025
    Thanks
    178
    Thanked 908 Times in 720 Posts
    Downloads
    62
    Uploads
    0

    Default

    13129843 CL

  14. #14
    DK Veteran
    teerak2uk's Avatar
    Join Date
    Apr 2009
    Location
    East Anglia
    Posts
    4,954
    Thanks
    1,137
    Thanked 1,037 Times in 750 Posts
    Downloads
    110
    Uploads
    0

    Default

    Quote Originally Posted by Shmortz View Post
    13129843 CL

    Try this one
    Attached Files Attached Files
    Oh and by the way if my post has been at all helpfull
    please press the little THANKS tab

  15. #15
    DK Veteran
    Shmortz's Avatar
    Join Date
    Apr 2010
    Location
    in the middle of nowhere
    Posts
    3,025
    Thanks
    178
    Thanked 908 Times in 720 Posts
    Downloads
    62
    Uploads
    0

    Default

    thanks but I don't need this, already tested with good dump for 95040, I think the problem is in processor that's why I want to compare the full flash for motorola with good one...

 

 
Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •