Passat B6 2005 Steering column lock defective

[eciepecie]

Hello everyone!!

as in the subject, the problem with the steering lock.

After trying to start the car on a weak battery, after turning it off, it stopped firing, the lock remained in open mode.
The ignition turns on but the engine starts and goes out blocked by the immo.
After removing the key from the ignition, it shows the message: Steering column lock defective and the red steering wheel light flashes.
After deleting all VCDS errors in the first second, the engine will start and everything is ok, but after turning off it will not start

So I thought - standard, to check the limit switch relays or the lock motor ...
So I removed the blockage:
1. I checked the limit switches - they are OK
2. I checked the lock motor - OK works every time
3. So I replaced the relays with new ones..
I installed the lock in closed mode, after deleting the VCDS errors, the lock worked (opened) the car started normally, but after turning off the lock did not close and there is still the same problem.
There is a lock error and a red steering wheel light.

there is an error in 25 immo:

00003 - Ecu
014 - defective

at 46 cent. conv
00003 - Ecu
014 - defective


Can anyone help what to do next?
Thank you

[rafal]

buy brand new , adapt with login from ccm to car

[radoslawwiklik]

I have similar problem and solved by write new .sgo to co mfort module.

[wuza]

I have similar problem and solved by write new .sgo to co mfort module.

Where did you find the .SGO file/ files? Here on forum?

[radoslawwiklik]

Give part number.

[wodorof]

i recommend change comfort module installed behind glove box(remember to reprogram eeprom)

[eciepecie]

Update On-Line Fixed the issue.

Thank you all for your help, cheers!