Here, stg1 for u , thx+rep = psw
be more active, help others
Here, stg1 for u , thx+rep = psw
be more active, help others
MEEF (8th June, 2023)
Thank you, can i have a pass please?
free for all the member and for you too
Last edited by alonedark; 11th June, 2023 at 02:14 PM.
MEEF (8th June, 2023)
MEEF (8th June, 2023)
1qa.JPGThank you for this.
Can you please tell me what exacly you have changed?
I compared a bit and see the diffrence on torque.
Anything else?
Also, changinf torque for 37% is not too much? There is 400nM, it means it will go to about 548Nm. Look a bit too much isnt't?
Just asking.
Last edited by MEEF; 11th June, 2023 at 11:59 AM.
1qa.JPG
It might be a good idea forget about cracked ECM if u want to learn something about chiptuning
i use ori tools no crack,...
Attachment 967432Thank you for this.
Can you please tell me what exacly you have changed?
I compared a bit and see the diffrence on torque.
Anything else?
Also, changinf torque for 37% is not too much? There is 400nM, it means it will go to about 548Nm. Look a bit too much isnt't?
Just asking.
limiters are at 400nm
WinOLS 5, FGtech, Piasini, Powergate M, Byteshooter, OptiCan Dual II, EVC BDM, VCDS, BeeProg+,Ktag, Kess V3, Autotuner, Bflash
Fileservice
no thanks no pass
surely more can be done
but was asked for 460nm
what the file also allows maximum
Last edited by Baddog84; 11th June, 2023 at 02:01 PM.
WinOLS 5, FGtech, Piasini, Powergate M, Byteshooter, OptiCan Dual II, EVC BDM, VCDS, BeeProg+,Ktag, Kess V3, Autotuner, Bflash
Fileservice
no thanks no pass
here is file with more power
chks by tool
WinOLS 5, FGtech, Piasini, Powergate M, Byteshooter, OptiCan Dual II, EVC BDM, VCDS, BeeProg+,Ktag, Kess V3, Autotuner, Bflash
Fileservice
no thanks no pass
MEEF (17th June, 2023)
im sorry the other file i was wrong , check it this file , try and repord free for all the members
Last edited by alonedark; 11th June, 2023 at 04:05 PM.
MEEF (17th June, 2023)
Bookmarks