peugout bsi or ecm problem / how to work planet propley as its new

[phoenix22]

I am new to this lads i'v come a cross a problem on peugeot 406 2.0 hdi 04 plate none start park it up and come to it and it wont start. so called us in to diagnose the problem. all so customer orded a new chip and key as his centrial locking dont work fob u/s i syrenised the key to transponder and orange key waring ligth went from dash board still wont start i can start vehicle ok on easy start the ecu is locked by planet soft ware but im new to planet as its new to me iv a snap on modus 9.4 and ecu wont let it communcate.so iv tried to i went in on planet did globle scan and it brougth up


u1- 12 volt no commucation
13 pin 18 volt nr in 8221 controle module transponder .824 wier pin 6 on c001 connecter 16volt nr short to postive on 824 wier repair the harness also line goes up to front seat belt info 6301 and another line goes to 6440 reverse gear indexing diagnostic info can any one help please as iv put in the 824 wiering code in wiering looms data comes back not in the data base. its not wet in floor wiering loom not wet i have fuse box out bsi out carpet drivers side out but still wont start i have live from eng to bsi and 2 lives to ecu but no more could do with a wiering digram for this vehicle cheers

[nutloose]

If the car is left standing with a power drain so the battery goes flat without the BSI going to sleep it loses its memory.

no VIN
no Keys
?? doors
? etc

when that happens you also cannot get comms with the engine ecu.

check BSI configuration first.
reset as required and add keys

[phoenix22]

vin no vf38brhzf81635568
build code 0980289
engine rhz
2.0 cc hdi
04 plate 406 s hdi
can say battrie never went flat just a none start
done globle scan brougth up wats on first thread and its new chip windows work centrial locking dosent work for some time remotes broken orange key goes out on dash not shure how to get in to planet rto pair it all up thanks

[phoenix22]

the bsi box no
valeo
bsi var c cd4
hw :3.0
sw : 4.28
ref valeo : 162 000 01
ref psa : 96 509 144 80
03/246/a

[phoenix22]

I am new to this lads i'v come a cross a problem on peugeot 406 2.0 hdi 04 plate none start park it up and come to it and it wont start. so called us in to diagnose the problem. all so customer orded a new chip and key as his centrial locking dont work fob u/s i syrenised the key to transponder and orange key waring ligth went from dash board still wont start i can start vehicle ok on easy start the ecu is locked by planet soft ware but im new to planet as its new to me iv a snap on modus 9.4 and ecu wont let it communcate.so iv tried to i went in on planet did globle scan and it brougth up


u1- 12 volt no commucation
13 pin 18 volt nr in 8221 controle module transponder .824 wier pin 6 on c001 connecter 16volt nr short to postive on 824 wier repair the harness also line goes up to front seat belt info 6301 and another line goes to 6440 reverse gear indexing diagnostic info can any one help please as iv put in the 824 wiering code in wiering looms data comes back not in the data base. its not wet in floor wiering loom not wet i have fuse box out bsi out carpet drivers side out but still wont start i have live from eng to bsi and 2 lives to ecu but no more could do with a wiering digram for this vehicle cheers [/QUOTE]

[phoenix22]

.dose any one know step by step to work the planet to match bsi box with thanks
pro code 9802 d9 2001 406 20 liter hdi 04 plate

[Ashraf6119]

Hi

1) Can you check on Dash if the Airbag Light goes OFF when you put the Ignition ON

2) Do your Wipers and Front Lights come ON even if you DON'T Switch them ON when you put the ignition ON.

Check This and report back here

Ash

[phoenix22]

hi mate
i can switch head ligths on normle
the head ligths come on when i unconnect couple connections on bsi box but go out when connected again


air bag ligth gose out when switch engnition on

nothing comes on if i dont switch them on thanks

[Albanais]

Your problem stays on comm2000.
It happens not very often but it happens that the cvv or comm2000 is faulty so this brings you to a faulty immobilizer and even worse you are not aloud to program new keys. So find one other comm2000 and replace it, i am sure that this will solve the problem

[Ashraf6119]

Hi

To add with Albanais post also check the wiring under Driver side Carpet near accelerlator Pedal.

Ash

[phoenix22]

Hi

1) Can you check on Dash if the Airbag Light goes OFF when you put the Ignition ON

2) Do your Wipers and Front Lights come ON even if you DON'T Switch them ON when you put the ignition ON.

Check This and report back here

Ash

hi mate ihave carpets out and all dry floors dry wiring like new and No coreded harness

[vitos]

Hi Pheonix, do you have comms with engine ecu.

check in bsi peramiters go into immo check transponder recognised

if no comms with engine check feeds earths
double relay at ecu gives problems on these.

ecu pins Ign off Ign ON
A1 A2 B11 B12 0volt 0v

B1 12v 12v

B25 12v 0-1v

B47 0v 12v

B48 0v 12v

B15 12v cranking (shut off valve)

Hope this helps