2.0 TDI CFGB don't start after remap

[Radu2000]

I have a Passat from 2011 2.0 TDI CFGB with 6 speed dsg 4 motion, and I have tried to remap with a post dieselgate version of the software that I "found" online but something went wrong and the car does not even crack.
Here is the Id
HW ver. 03L907309N
UPG. SW 03L906018BN
SYSTEM EDC17 CB.03.15.00 C47.00
ENGINE R4 2.0l TDI
Chassis WVWZZZ3CZBE335602
I have writed it with a kess v2 clone.
And here it the bin file that I have flashed: https://drive.google.com/file/d/1gRj...usp=drive_link
If anyone can help me or give me a hint of what i did wrong

[Aladinnu]

Big mistake. You flashed wrong sw version on ur ecu. Kess clone is not able to change sw version. Now if ur lucky there are 2 things u can try.
1. Open ecu, make full backup just to have Eeprom
2. After you need to get proper tool that can make update to ur ecu and it might be alive again.
Don t play with clone on edc17.


Sent from my iPhone using Tapatalk

[Radu2000]

I will have to get a k-tag to do it or i can use kess, and what proper tool to be more precise?
Thank you

[Aladinnu]

First get a tool that can make a backup. Does car still have coms over obd?


Sent from my iPhone using Tapatalk

[Radu2000]

Yes, it does, i can make id and i can use vcds

[Lambda1]

Flash correct file to ecu and hope it works again well... then better buy a correct tune for... good engine for tunes if you know what you doing.

[Radu2000]

I have foud the file that i needed and it works just fine, thank you guys for advices.

[Lambda1]

And now work in this file and got good results...