swap BSI E02-00 with 95160 and D76F0018GJ from xsara

[peko]

hi friend

no way to clone this bsi

i virgin eeprom 95160 learning pin ... engine start but is Noel inside car

no way to telecode using lexia because not accees to all options

i already swap bsi but this one

so i must swap mcu 76F....

anybody have pinout or any advice or idea ...

thanks friends

[ricked]

you did use probably the wrong virgin file, i did lots of these with no issues at all

[peko]

my virgin is ok because i learn pin and engine start but config & options no way

[ricked]

and you did us exact same donor with all numbers the same, because if there is a software mismatch you get what you did described

[peko]

exact same part ori and donor
but donor from 206 to install on picasso
but same part number without success to code it fine using lexia

i read in forum must swap mcu so looking for pin to read it without success

[ricked]

exact same part ori and donor
but donor from 206 to install on picasso
but same part number without success to code it fine using lexia

i read in forum must swap mcu so looking for pin to read it without success

there is your problem, you need to get one from same kind of car as you dont clone the MCU
MCU does have software for the 206 that does not have options inside this software that de the xsara, 100% sure this is your problem

in short, there are more then 100 software types for the bsi they try to read the pin code with avdi and f#ck the software and they need the exact same sw code to get it working again