Ford C-max 2011 abs pump swap immo problem

[marek128]

Hi.

Someone damaga abs pump and swaped. car dont start - immo fault on dash. I virginise abs unit by smok UHDS - obd. Done FJDS Programable instllation module all ok but same fault imm on dash. no faults in ecu bcm abs rfa. In smok immo scan abs is stil as virgin. Tried forscan also. is only way by online ford equimpment?

[lupu_sandu]

Make ecu virgin, abs virgin, bcm virgin,. DO NOT ERASE KEYS!
Afteer all 3 are virgin remove key from ignition for 1-2 minutes.
Car will start.

[marek128]

Thanks mate. It worked. But starter relay dont working. I reset ECU BCM ABS RFA(keyless unit). After 5min ignition off only bcm stay virgin - its correct? Is no fault immo on dash now, but engine start only when i manually close starter relay.


edit: i hawe faulty ecu.

[lupu_sandu]

RFA is no need to make virgin.
All modules after ignition off must be in programmed state

[marek128]

Thanks again. now i made reset bcm pcm abs and all working ok all programmed state!!!! Thanks for knowledge!

[peko]

Thanks again. now i made reset bcm pcm abs and all working ok all programmed state!!!! Thanks for knowledge!

hi friends

proxy alignement with diag tool , not work ? or must virgin ecus before ?

[marek128]

i did all by smok - obd.