.>>>>>>>>>>>>>>>>>>Xhorse Multi Prog<<<<<<<<<<<<<<<<<<<

[Maartinj]

New Xhorse Multi Prog device
Let start discussion here and only here





>>>Download software<<<

[foxtec800]

No information on this with regards current VVDI-prog functions, is it only ecu/tcu cover on release and are eeprom/mcu being added or left
on vvdi prog ?

[ttzag]

Is it fully instead of vvdi prog?
Or we need to use both?

[Maartinj]

Is it fully instead of vvdi prog?
Or we need to use both?

Right now , there is no adapter for old adaptors such as XDPG14 - they use IDC connector
so they can not be mount in Moultiprog

[sanshao]

Can Support NXP NCF29xx:
NCF2951(24K)@TSS0P38
NCF2951@ICPLine
NCF2951@TSS0P38
NCF2951ETT@ICPLine
NCF2951ETT@TSSOP38
ECF2952@ICPLine
NCF2952@TSS0P38
NCF2952ETT@ICPLine
NCF2952ETT@TSS0P38
NCF29A1(24K)@ICPLine
NCF29A1(24K)@QFN32
NCF29A1@ICPLine
NCF29A1@QFN32
NCF29A2@ICPLine
NCF29A2@QFN32
NCF29A3@ICPLine
NCF29A3@QFN32
NCF29A4@ICPLine
NCF29A4@QFN32

[brend]

Spansion still no in here !

[sniegavirs]

Looks promising. Finally usable HEX editor only missing function is ability to switch from HEX to Decimal view. That would be very useful!!!

[3staar]

Looks good, what to come of the old faithful vvdi prog? have instabilities of vvdi prog been addressed? mcus which had issues being read/cracked?

A little late to the market with what it is offering in terms of the ecu/tcu functions, nothing new to make it stand out or make it a must purchase for everyone. Most advanced comrades will have tools which cover them, suppose its a good starting tool for the new comers...

[sniegavirs]

This thread should be transfered under --> Airbag, ChipTuning, Dash, ECU, IMMO, Locksmith, Radio, SatNav section in forum. Here it is unnoticed.

It looks like there are problems with Multiprog and also Key Tool and Mini Prog using soderless adapters for CAS4 and Land Rover KVM

https://www.youtube.com/watch?v=e4tmAsr3Fxs
"VVDI MULTIPROG, KEY TOOL PLUS, VVDI MINI PROG failed to decode CAS4+ (5M48H) with Solderless Adapter.

in the beginning, when the solder-less adapters first came out the algorithm used to decode, the BMW Cas4/4+ module used to work perfectly. until recently, Xhorse decided to update the algorithm to decode/crack cas 4+ .


nothing will work not the key tool plus, VVDI, mini Prog or Multiprog because they all used the same algorithm since they’re part of the same system.


VVDI Prog the Original Tool is very different in terms of reading chips and decoding, certain MCU that are not found on the key tool plus or multi prog.


xhorse please fix the problem. This cannot be ignored


ADAPTERS THAT CURRENTLY DO NOT WORK ON MULTI-PROG:
1. XDNP12 - CAS4/4+
2. XDNP16 - LAND ROVER/JAGUAR KVM"

[badenaleks]

Hi everybody! Maybe somebody tried to add his script to Multiprog? I am asking because it looks like we have this option but a manual on how to add your script in Chinese.

[mikajna]

Hi guys I just tested on two ecu, didnt test anything else

Edc17c46 Vw golf 6 Read eeprom and flash on bech
Its ecu from my stock and dont know if everything went good, but reading success

Edc16c34 Peugeot failed to connect, tested on several ecu from list, and two pinout versions

Come on guys, share your experince, and we will see is this tool hit or miss

[mikajna]

Kia Hyundai EDC16C39 bench eeprom/flash read and write - OK

[maajkii]

msd80 r/w ok

[lupu_sandu]

I see that there is no VVDI Multiprog thread.
Feel free to post feedback here.
I personally tested on edc17c49 Iveco boot mode: all ok.

[BadeaCristian]

it does checksum as well?