Esp long coding for GOLF 5 mk60ec1

[adiward]

Hello,

I'm writing this post for my golf 5 with and esp/abs problem. When i got this car everything worked fine except one dashbord light that i forgot about, i got it to the mecanic where he did something in vcds and after that my abs/esp stopped working. I think it has to do with the long coding. I tried doing it myself but failed, it says that coding is out of range everytime. I even bought a calculator for esp, i will attached if someone needs it. So I will post my vcds scan and my hardward info. If someone can help me diag this problem.

[cristo_844]

your problem is not codind...
you need to perform basic setings and System Function Test

[rafal]

looks funny when users buying tools and don't know how to use

[adiward]

I did the system function test, it worked, but when i did the basic setting i got No Valv [000/000] >000< Error 212

[adiward]

I've finished all the test, everything work after i clear codes, but after 20km/h abs esp light up and parking brake flashed and i get 1130 abs operation implausible signal

[cristo_844]

01130 - ABS Operation
01130 - ABS Operation: Implausible Signal
Possible Causes
Fuse(s) faulty
Modifications/Retrofits incompatible
Wiring from/to Brake Electronics Control Module (J104) faulty
Electrical Interference from External Sources
High Frequency Radiation (e.g. non-insulated Ignition Cable)
Brake Electronics Control Module (J104) faulty
Possible Solutions
Check Fuse(s)
Check Vehicle for Modifications/Retrofits
Temporarily remove Modifications/Retrofits (including Wiring)
Check Wiring from/to Brake Electronics Control Module (J104)
Check Brake Electronics Control Module (J104)
Special Notes
This Fault Code can only be cleared after performing a Test Drive above 20 km/h (13 mph)