Lancer CY 2010 chip precode

[Manta1600]

Today I had Lancer 2010 Hatchback CX - AKL

The car won't accept the chip that I precoded to id46 cryptomode as usually

tried few chips also tried password mode

I saw other threads for the same model with the same problem

are they use different precode?

*CX - model

[azikri locks]

Usually I use super chips.. when it won’t accept the pre coded 7936 I’m generating a blank 7936 or Original NXP 7936AA one of them will work


Sent from my iPhone using Tapatalk

[Manta1600]

Usually I use super chips.. when it won’t accept the pre coded 7936 I’m generating a blank 7936 or Original NXP 7936AA one of them will work


Sent from my iPhone using Tapatalk

I also use XT27 and never had a problem

today I also tried genuine 7936 password and Mitsubishi crypto mode and Handy Baby chip generated for Mitsubishi

[azikri locks]

Have you checked the ignition coil?


Sent from my iPhone using Tapatalk

[Manta1600]

Have you checked the ignition coil?


Sent from my iPhone using Tapatalk

Yes the ignition coil has signal KD and Hxorse recognise the signal as 46

Strange when generate Mitsubishi chip VVDI2 recognise it as Crypto Biphase

When program chip from similar mitsu dump the chip is - Password Biphase

[azikri locks]

What tool are you using? On bench or by OBD?


Sent from my iPhone using Tapatalk

[Manta1600]

By OBD I used im608 and KTP - Today will try Smartpro

for dump used Tango and VVDI2 (I used dump from similar car just to check what chip will generate after programming)

[azikri locks]

Got it…. After programming using the 608 the chip is locked?


Sent from my iPhone using Tapatalk

[Manta1600]

Got it…. After programming using the 608 the chip is locked?


Sent from my iPhone using Tapatalk

No - program fail and the chip is still unlocked

The pin 8A32 is the right one - If I use different pin I have message wrong pin

If I enter few times wrong pin then system lock for 15 minutes - On SmartPro there is message that must wait 35 minutes today will try

[azikri locks]

Understood … not sure about the pin code usually autel forces a random pin code and then you are locked out of the system and need to wait approx 35-45 minuts … check this list hope it helps


Sent from my iPhone using Tapatalk

[Manta1600]

Ign ON for 1 hour and programmed with Autel

[azikri locks]

Ign ON for 1 hour and programmed with Autel

Happy days!! Is 8A32 was the right PIN code?


Sent from my iPhone using Tapatalk

[Manta1600]

yes 8A32 is the right code