KEYDIY FIAT GP DELPHI BSI KEY PROGRAMMING PROBLEM

[Panathaole]

Hi.....

i try to add a key from keydiy (NB11 series with 3 buttons) to a Fiat GP and delphi bsi.....

i prepare the key with keydiy SW, i have HITAG2 id46 7946 transponder produced for the Fiat, i have the pin code from the bsi....

after i try to add in bsi with pincode, but not possible.... key authedication error, i try with MES.....


the eeprom from bsi must prepared first with this key to accept the programming????

[bmujka]

need to prepare dealer key but dont use kd or xhorse they tend to have problems

[Panathaole]

need to prepare dealer key but dont use kd or xhorse they tend to have problems

dealers key in a Fiat??? first time i hear that.....

[bmujka]

f.jpgcheck obdstar dealer key

[turismou]

Newest obdstar updates have a problem, they read pin code and prepare dealer key fine, but when you're adapting keys to car, it will for some reason fail (as if you entered a wrong pin). Pick up any other tool, for example autel, write the same pin and it will add it fine.

[Panathaole]

i don't have obdstar, i use keydiy NB11 key and repaired with keydiy kd-x2...............

and i use multiecuscan for adaption..... pin is accepted but the key not........

[azikri locks]

i don't have obdstar, i use keydiy NB11 key and repaired with keydiy kd-x2...............

and i use multiecuscan for adaption..... pin is accepted but the key not........

Wiche fiat is that? Model and year? As mentioned above you need to read key data and prepare dealer key first ..all by OBD. Need to generate transponder preceded for fiat with xt27 or any other 46 (depends on the model)fiat pre coded, you can use keydiy or xhorse the remote might fail to lock &unlock but never fail to start the engine


Sent from my iPhone using Tapatalk

[Panathaole]

fiat key.jpg fiat key1.jpg fiat key2.jpg

car is a GP 2007 with delphi bsi.... i choose in keydiy grande punto(06-10) Delphi BSI (R01931) and try to add it with MES.....

fiat key_f.jpg

[azikri locks]

fiat key.jpg fiat key1.jpg fiat key2.jpg

car is a GP 2007 with delphi bsi.... i choose in keydiy grande punto(06-10) Delphi BSI (R01931) and try to add it with MES.....

fiat key_f.jpg

Try this.. first program the original key then the keydiy key and report



Sent from my iPhone using Tapatalk

[antonis132]

maybe first time make fiats, only punto 2000-2003 and first doblo no need dealer key
first dealer key then learn key, car starts and button works

[Panathaole]

Is true that I don't make keys.....(only few cloning and few for older cars....)

Then I guess I need other tool for this work.....

I am planning to buy im508s...... probably it will be easy job for it....

[azikri locks]

You should’ve mentioned this at first… you need a tool that is able to generate dealer key not only programming


Sent from my iPhone using Tapatalk

[antonis132]

yes im508 works great for all fiat group, easy job on 5 minutes

[tepSIJA]

autel im508/608 , 5min job, read immo data & Pin, make dealer key, learn keys.
U must have tool to precode/make dealer key. Multiecuscan can only learn dealer keys.


hints

1.First learn original key after that your new key
2.Dont use KD/Xhorse for fiat, 50/50 succes/fail from my experience
3.Buy aftermarket key for that type of car, cheap and good, 10-15Eur online