38910-80SC0 Suzuki help needed

**tihiuvek** · 21st May, 2024, 07:45 AM

Hello,
I need help with Suzuki RH850 R7F70123 .
I am reading with original UUprog and every time verify error is present.
Can somebody please, confirm my reading and clear crash?
Dump with 8 errors attached:

Thanks!

**km666** · 21st May, 2024, 09:16 AM

Test and report.

**tihiuvek** · 21st May, 2024, 09:34 AM

I will test and report back!

**tihiuvek** · 23rd May, 2024, 11:08 AM

Unfortunately does not work!
No communication with ecu!

**tihiuvek** · 23rd May, 2024, 02:55 PM

Can somebody please send a pinout in order to connect on table?
Suzuki swift 2022
Thanks!

**shluxer** · 23rd May, 2024, 03:10 PM

38910-80SC0

Small socket

A - Pin 5=12v
A - Pin 3=GND
A - Pin 1=CAN L
A - Pin 2=CAN H

**tihiuvek** · 23rd May, 2024, 03:37 PM

Can you please, chek once again GND +canH and CanL doesnot corespond properly. GND is not on pin3 for sure

**shluxer** · 23rd May, 2024, 03:43 PM

take a picture of the sokets

**epd1221** · 23rd May, 2024, 03:44 PM

here is pinout

**shluxer** · 23rd May, 2024, 03:46 PM

Originally Posted by epd1221

here is pinout

its ok
pin5=12v
pin8=GND
pin11=CAN L
pin10=CAN H

**tihiuvek** · 23rd May, 2024, 03:50 PM

Yes that is correct pinout!

**tihiuvek** · 27th May, 2024, 03:58 PM

I successfully connected to srs but no results.
Maybe somebody has a new clear dump (without crash fromsome other car)?

Thread: 38910-80SC0 Suzuki help needed

Thread Tools

Display

38910-80SC0 Suzuki help needed

The Following User Says Thank You to km666 For This Useful Post:

The Following User Says Thank You to shluxer For This Useful Post:

The Following User Says Thank You to shluxer For This Useful Post:

Bookmarks

Bookmarks

Posting Permissions