Hello,
I need help with Suzuki RH850 R7F70123 .
I am reading with original UUprog and every time verify error is present.
Can somebody please, confirm my reading and clear crash?
Dump with 8 errors attached:
Thanks!
Hello,
I need help with Suzuki RH850 R7F70123 .
I am reading with original UUprog and every time verify error is present.
Can somebody please, confirm my reading and clear crash?
Dump with 8 errors attached:
Thanks!
Test and report.
If I helped, use magic buttons reputation+thanks.
Best regards.
tihiuvek (21st May, 2024)
I will test and report back!
Unfortunately does not work!
No communication with ecu!
Can somebody please send a pinout in order to connect on table?
Suzuki swift 2022
Thanks!
38910-80SC0
Small socket
A - Pin 5=12v
A - Pin 3=GND
A - Pin 1=CAN L
A - Pin 2=CAN H
Last edited by shluxer; 23rd May, 2024 at 03:15 PM.
tihiuvek (23rd May, 2024)
Can you please, chek once again GND +canH and CanL doesnot corespond properly. GND is not on pin3 for sure
take a picture of the sokets
here is pinout
tihiuvek (23rd May, 2024)
Yes that is correct pinout!
I successfully connected to srs but no results.
Maybe somebody has a new clear dump (without crash fromsome other car)?
Bookmarks