Car had a cluster swap. Original mileage 219,458. Corrected mileage needs to be 177,285.
Can anyone help? Thanks!
Car had a cluster swap. Original mileage 219,458. Corrected mileage needs to be 177,285.
Can anyone help? Thanks!
Any discrepancy because these are calculated in Km.
Please DO NOT PM me asking for help.
Post in the forum, that is what it is here for.
jr1323 (25th May, 2024)
I'm getting "Verification error on address: 000000E0". Burning the original .bin seems to work without error.
Sorry to ask for more help, but is this likely a problem with my setup, or with the file?
Burning to a 93C66 with CH341 programmer and AsProgrammer. Using Microwire mode, 512 size, 8 address length.
Tried both with the clip, and with leads soldered directly to the pins. The chip is desoldered from the board...
It is NOT the file.
Please DO NOT PM me asking for help.
Post in the forum, that is what it is here for.
I'll keep looking into it then. Thanks for the help!
buy "upa 1.3 programmer", it costs less of 30 usd in aliexpress or ebay and definitly is better than CH341 programmer shit
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ONLINE CAR FILE EDITION SERVICE
SERVICIOS DE EDICION DE ARCHIVOS AUTOMOTRICES
The issue was resolved by using NeoProgrammer rather than AsProgrammer. The replacement cluster now reads the correct mileage, thank you!
Bookmarks