Hello, need for DTC off of this van DTC off, here I attach data
Peugeot boxer 2.2 88kw year 2008
ecu visteon DCU 102
dtc off :P1304
I can't code injectors and I need DTC off thanks and regards
Hello, need for DTC off of this van DTC off, here I attach data
Peugeot boxer 2.2 88kw year 2008
ecu visteon DCU 102
dtc off :P1304
I can't code injectors and I need DTC off thanks and regards
Last edited by garagesport; 24th May, 2024 at 09:35 AM.
here you go dtc off
If im helped thanks and rep.
garagesport (24th May, 2024)
Hello, it doesn't work, the DTC disappears due to diagnosis, but the light is still on in the dash.
reset in eobd mode. file is original?
Fault code P1304 on 2.2 HDI engine with Denso injectors. This error is for injector calibration .. solution to solve this problem is to run injector quanity calibration with Texa, Bosh, lexia, Autocom,or,,, diagnostic tools. This engine not only need injector codes written ,but also need fuel presure regulator and injection quanity calibrated, This procedure need about 15 min. if some injector or fuel presure regulator is faulty calibration is unsuccessful !
garagesport (24th May, 2024)
garagesport (24th May, 2024)
Bookmarks