do i need t update softmodded wii

**yamar1** · 17th December, 2011, 10:58 AM

Hi all, been a while since i messed with the wii as its been working fine, couple of year back i softmodded it using the twilight hack, its running 3.2e. so, some newer games are not working using gx loader with the hard drive namley glee kaereoke, and a couple of others, is there any way to update the wii and still have the softmod or shal i leave it and live with it as its working most games?

im just a bit rusty and dont want to brick the wii.

**happy_highlander** · 17th December, 2011, 11:57 AM

Install this Digital Kaos - Downloads - sysCheck v2.1.0 Beta 9 into your apps folder on the sd and run it . This will create a syscheck csv file on your sd...Put the sd into the pc and ricght click the csv file, select open with wordpad (not notepad). Now run this http://www.digital-kaos.co.uk/forums...indows-170234/ on your pc and when it comes to asking what you want to do select update ios/cios. As you go through it will ask for you to enter your syscheck file. Copy and paste the file from your sd card that you opened with wordpad, this will now copy all the files youneed into a folder on your pc. Copy the contents of the downloaded folder pnto sd stick it in the wii and install the new files you will now be updated and able to run almost all games without any problems

**yamar1** · 17th December, 2011, 08:18 PM

hi, thanks,, just ran sys check as you said and it stops and says the message "failed to get the stored TMD size for ios38" then the wii reboots? any clues??

**Keithuk** · 17th December, 2011, 09:23 PM

yamar1 post your sysCheck.csv report as instructed in the download.

**yamar1** · 17th December, 2011, 10:21 PM

Originally Posted by Keithuk

yamar1 post your sysCheck.csv report as instructed in the download.

as i said its stopping and im getting a pop up error messege, and no csv file is being produced.

**Keithuk** · 18th December, 2011, 01:43 AM

Perhaps it doesn't work on 3.2e it is quite old you know?

**yamar1** · 18th December, 2011, 12:26 PM

update, iv upgraded to 4.3e via the wii and used the letter bomb, i have homebrew working but when i select a game from gsx loader it just goes back to homebrew channel and does not play the game, do i need any more files to enable gsx loader to work on 4.3?

**Keithuk** · 18th December, 2011, 01:54 PM

I'm not sure why that is yamar1 if you followed the USB Loader GX tutorials and installed the correct wads.

Now if USB Loader GX shows the games on the HDD then to me it must be reading the drive. If you click on a game then the disc picture and it goes back to the homebrew channel it could be a bad drive/sectors.

Do this happen with every game or just some?

How many games are there on your drive?

How is the drive formatted FAT32, NTFS or WBFS?

Oh a little tip for you. Its a bit of a pain starting HBC the finding USB Loader GX and starting that app you may as well have the USB Loader GX forwarder channel on your Wii menu.

I've uploaded USB Loader GX-UNEO_Forwarder.wad in Post #9

Just put the wad in the wad folder on the SD card and register it with MMM.

If you have CFG USB Loader and WiiFlow installed and you want a forwarder channel for these let me know?

**yamar1** · 18th December, 2011, 03:19 PM

Originally Posted by Keithuk

I'm not sure why that is yamar1 if you followed the USB Loader GX tutorials and installed the correct wads.

Now if USB Loader GX shows the games on the HDD then to me it must be reading the drive. If you click on a game then the disc picture and it goes back to the homebrew channel it could be a bad drive/sectors.

Do this happen with every game or just some?

How many games are there on your drive?

How is the drive formatted FAT32, NTFS or WBFS?

Oh a little tip for you. Its a bit of a pain starting HBC the finding USB Loader GX and starting that app you may as well have the USB Loader GX forwarder channel on your Wii menu.

I've uploaded USB Loader GX-UNEO_Forwarder.wad in Post #9

Just put the wad in the wad folder on the SD card and register it with MMM.

If you have CFG USB Loader and WiiFlow installed and you want a forwarder channel for these let me know?

its formatted wbfs and was working fine, just a few games didnt work, and all games just reset it. theres around 50 games on it its a 500 gb hard drive.

**Keithuk** · 18th December, 2011, 04:35 PM

Originally Posted by yamar1

just a few games didnt work,

Which games please post the names as there are quite a few Wii games that don't without a tweak?

Have you downloaded and installed the USB Loader GX-UNEO_Forwarder.wad?

**Keithuk** · 18th December, 2011, 04:38 PM

Originally Posted by happy_highlander

Install this Digital Kaos - Downloads - sysCheck v2.1.0 Beta 9

Sorry HH I've updated it to sysCheck v2.1.0 Beta 11. I couldn't add the newer file and change the name so I made a new one.

Digital Kaos - Downloads - sysCheck v2.1.0 Beta 11

**yamar1** · 18th December, 2011, 06:08 PM

Originally Posted by Keithuk

yamar1 post your sysCheck.csv report as instructed in the download.

just ran it and got this

sysCheck v2.1.0b13 by Double_A and R2-D2199
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.3E (v514)

Homebrew Channel 1.0.8 running on IOS58
Hollywood v0x11
Console ID: 71744538
Boot2 v4
Found 117 titles.
Found 45 IOS on this console. 15 of them are stub.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS249 (rev 65280): Stub
IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10

Report generated on 2011/12/18.

**happy_highlander** · 18th December, 2011, 07:39 PM

Originally Posted by yamar1

just ran it and got this

sysCheck v2.1.0b13 by Double_A and R2-D2199
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.3E (v514)

Homebrew Channel 1.0.8 running on IOS58
Hollywood v0x11
Console ID: 71744538
Boot2 v4
Found 117 titles.
Found 45 IOS on this console. 15 of them are stub.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS249 (rev 65280): Stub
IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10

Report generated on 2011/12/18.

how have you managed to stub out the 222 223 and 249 cios download this Digital Kaos - Downloads - modmii 4.3.4 and run it on your pc then in the main list choose the system checker (SU) then drag and drop the csv file that you have generated and put on here into the modmii box and it will download all the files you need to update your wii. You can then install the rest of the d2x pack if you want to.

**Keithuk** · 18th December, 2011, 08:04 PM

IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS249 (rev 65280): Stub
IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0

It looks like you only have IOS250 installed the main one for USB Loaders is IOS249. You would be better off installing all the wads in Digital Kaos - Downloads - D2X v7 WAD PACK

**happy_highlander** · 18th December, 2011, 09:19 PM

Originally Posted by Keithuk

It looks like you only have IOS250 installed the main one for USB Loaders is IOS249. You would be better off installing all the wads in Digital Kaos - Downloads - D2X v7 WAD PACK

That pack needs to be installed after a full update through modmii. You may not have noticed but the revision numbers of patched ios are a bit low and cios 236 is missing completely which is the best cios for installing d2x into

Thread: do i need t update softmodded wii

Thread Tools

Display

do i need t update softmodded wii

Bookmarks

Bookmarks

Posting Permissions