Coding the new MQB platform! Vag-Com

[richard27]

Interested experts, amateurs and those who are just interested! I recommend that you publish information about the coding of the new MQB platform here. Currently they are three models:
1. VW Golf 7
2. Skoda Oktavia A7
3. Audi A3
I think the topic will be useful and informative, considering that VAG will transfer other relevant models to this platform in the future. . As per tradition,
I will start with the post about Octavia that I have researched so far
1. Arrow test - Block-17 - encoding - long encoding - byte 1 - enable bit - 0

2. Turning on the taillights only in DRL mode
- Block 9
- Closed section -Enter access code 31347
-adaptation -channel - (6)
- Tagfahrlicht - Dauerfahrlicht aktiviert zusaetzlich Standlicht auswählen -change the value to Active

3. Deactivating the seat belt warning
- Block 17 -coding -long coding
-Byte 0 -Disable bit 2 -4

4. Tilt of the right mirror when reversing I did this:
- block 52 - encoding - byte 4
- enabled bits 2 and 3. more
- Block 9 - adaptation
- (15) Access control 2-Spiegelabsenkung bei Rueckwaertsfahrt - Aktiv further - let's go there - (20) Access control 2-Menuesteuerung Spigelabsenkung - aktiv

5. Display of battery status on the on-board computer Switch off the ignition - press and hold until the message 1 appears on the device.
Press the "Set" button and hold the odometer (0.0/SET button)
2. Release the button when battery displays in the status indicators 3. Battery indicator displays

6. Adaptation Hill Start Assist Control unit of the electronic braking system has the possibility to adapt the hill start assistant in the Skoda Octavia III 5E.
This way you can adjust the behavioral approach accordingly. Depending on the brake set, it is thus held shorter or longer, thus facilitating approach behavior depending on your needs. The following encoding is used:
Select block 03 (Brake Electronics) 1. Adaptation -> function 10 2. Select Berganfahrassistent 3. value corresponding to normal configuration:
default parameters: early, normal, late

7. Displays fan speed in automatic mode, for air conditioning In the climate control unit you have the option to activate the fan speed display in AUTO mode on the Skoda Octavia III 5E.
Once activated, the current fan speed is displayed in AUTO mode using the LED display.
(By default the indicator is displayed only when the fan speed is set manually)
The following encoding is used:
Block No. 8 (Air) 1. Long coding -> Function 07 2. Byte 11 3. Bit 6 - Enable Fan Status Display in auto active mode

8 Storing the last set of seat heating phases In the climate control unit, you have the option of saving the last set of seat heating phases for activation.
Thus, the preset level is automatically reset after the vehicle is restarted.
The following encoding is used:
Block 08 (Air) 1. Adaptation -> function 10
2. Select the Speicherung der Sitzheizungsstufe Fahrer channel
3. Set the value to active (Default value: not activated) 4. Speicherung der Sitzheizungsstufe Beifahrer
Select channel 5. Set the value to active (Default value: inactive)

9. Tank area 1. Select block 17 (key)
2. Long coding -> Function 07
3. Byte 10 4. Enable bit 4 (fourth character of 1 in the binary code set, if not 4 bits)

10. Turn on the fog lights when the Return Home, Living at Home function is turned on 09-On-board power supply control unit
16-Indoor area Enter code - 31347 Run 10-Adaptation channel 4 (Fog)

11. When lifting the handbrake, turn off the lights in "0" " mode
09-Built-in network control unit 16-Indoor area Enter code - 31347 Execute 10-Adaptation Find the item
(5) Tagfahrlicht - Dauerfahrlicht bei Handbremse abschalten Active Run

12. The standard alarm on Elegans is activated via the bolero to accompany the opening and closing of the cabin with sound.
09-In-vehicle network control unit
16-Indoor area Enter code - 31347 Run
10-Adaptation 1 channel - YES, 2 channels - YES, 8 channels - Active, 7 channels - Active, 3 channels - Normal.

13. Activating the folding function of the side mirrors by pressing and holding the door close button
09-Onboard power supply control unit
16-Indoor area Enter code - 31347 Operation
10-Adaptation channel 22 (Access control 2-Funk) with comfort operation

14. Speed-dependent switching of the adaptive lighting system in corners (Corner)
09-Onboard network control unit 16-Indoor area Enter code - 31347 Run
10-Adaptation Channel 3 (Static AFS) set to 0 km/h Channel 4 (Static AFS) is set to 50 km/h

15. Changing the amount of turn signal flashes in overtaking or lane changing mode (short press on the turn signal lever)
09-Power supply control unit on the vehicle
16-Indoor area Enter code - 31347 Run
10-Adaptation 2 channels (Return signal control) - adjust the required amount (5)

16. LEDs in license plate lighting (no errors)
09-In-vehicle network control unit 16-Indoor area Enter code - 31347 Execute 10-Adaptation 1 channel (Leuchte25KZL) (set to 43) 6 channels (Leuchte25KZL) (set to 127)

17. Increasing the response range of headlight washers
09-In-vehicle network control unit 16-Indoor area Enter code - 31347 10-Set Adaptation Channel 1 (Windshield wiper – Anzahl) to 15 18. Increase the response time of the headlight washers
09-Block on-board network control 16-Indoor area Enter code - 31347 Run
10-Adaptation Channel 2 (Windshield wiper-SRA) is set to 1500 19. Increasing the rear window heating time 09-Built-in network control unit
16-Indoor area Enter the code - 31347 Run 10-Adaptation Channel 3 (Window heater) setting I checked all the coding up to 1200, everything works. The only nuance is at point 10.
When activated, it completely stops operation during startup. When raised, both xenon and fog lights come on. I really don't like it... We're working harder for now.
I am very interested in how to activate the key fob with the ignition on so that the car can be locked with the engine running.
And if there is an access code for block 44. Since it is possible to activate TSC (steer the car to the right), but you need an access code.

st@vr thanks

[fuzz1]

Nice info. But is it in the right forum? Thought this was commercial industrial section