MG/Rover Pektron Virgin dump?

[nutloose]

Does anyone have a virgin dump from a Pektron immo (not 5AS) for an MG ZR 2004?
256 byte 93lc66a
VIN @ 017F-018F
Apparently you cannot fit a previously used one to replace a faulty unit.
Thanks

[Meat-Head]

*CONFUSED*

iF YOU HAVE a keyboard that plays up chuck it.

take it you mean "SCU" if you swap that 93c66 eeprom from dead unit to new unit/second hand, the customer is none the wiser. Engine starts remotes work, but 99% sure/THINK you need Testbook to 'activate front frog lights and bi-day' (rear wash wipe)

you 'cant' use secondhand remotes unless your programmer can suck out the codes, 14 didgit (ish) for you to re-use,

If you have had 15 goes key programming and locked up the unit, battery off vechile, short pin 1 of said eeprom to battery and power up.

NB you will need ear defenders as the alarm siren will kick in untill it gets bored, tough shit, stuff with rags

I bust my programmer a few months ago, but if you want can stick a USED 93c66 eeprom in the post (2nd class) if you PM postal address.

[parapilot]

whats the problem? is the unit faulty or lost remote? you can write a new remote into dump if its lost keys. Dealers would just replace it.

J

[squirrelbandy]

tradeonly
this is a good freind of mine developping his own software tools for the job.

[nutloose]

thanks for the replys,
I had a faulty SCU with no working remotes (also no comms with T4) and I wanted to fit a used virginised one with T4.
As it is I dumped the 93lc66 and added two new remotes then refitted it.
It appears OK now.
I would still like a virgin dump so I can have one ready on the shelf for next time though.
I just dont fancy buying one from rover to dump it.


I thought if you just swapped the eeproms you would still have to match the "new" one to the ECU?

[teckie2]

here you go Virgin SCU File

HTH

Teckie2

[Meat-Head]

I thought if you just swapped the eeproms you would still have to match the "new" one to the ECU?

Don't ask questions, but it is possable to get a secondhand unit with pre-programmed keys, fit it and match up to the orignal engine ecu.

Teckie 2

Where are the keys stored in here?

Thanks

[PierreTheron]

Hi thanks for this help full info.
Have got rover mg TF with no key fob .
Have got rover Mg ZF with faulty SCU With programmed keyfob .
Will swop ee prom and see what happens.
How do you programm remotes into scu eeprom.
Can t300 pull eka code?
Answered my own ? T300 can pull the code and kill it as well,Pulled code and then got in wrong menu- code remotes , could not get out , unplugged, Car not to start after that.
Can find remotes local at 280 euro a piece.
Where can i Buy these oval pectron remotes ?
Regards
Pierre

[khalidassrory]

ineed dump for sonata 2005 93s56

[kugglefischer]

ineed dump for sonata 2005 93s56

HEY!
DONT BUMP IN A THREAD THAT HAS NOTHING TO DO WITH HYNDAI SONATA'S!
START YOUR OWN M8!

[Meat-Head]

HEY!
DONT BUMP IN A THREAD THAT HAS NOTHING TO DO WITH HYNDAI SONATA'S!
START YOUR OWN M8!

WHAT ABOUT BUMPING A THREAD WITH A SPAM POST NOBODY ANSERED A MONTH AGO? - SORRY CAPS LOCK

[PierreTheron]

Hi got this Rover sorted in other thread.
Meathead, do you still want to know where the barcodes are stored in 93lc 66 dump of the scu.

Regards

Pierre

[ninja123]

i would like to know where the barcodes are stored mate

[ninja123]

also, if i use the virgin dump, can i just program new fobs with testbook, t300, mvp etc??

[the maestro]

hi i have this file if you require it but will need coding with t4 and one new plip