Audi a3 8p Instrument Cluster replaced with problems

[uncompagnero]

Good evening everyone and congratulations for the dk forum
I apologize in advance for my English but I used a translator to write
I need your help kindly
I am the owner of an Audi A3 8P Sportback from 2008. I needed to replace my red cluster complete with FIS (8P0920931E where on this through the eeprom 24LC32 EZP reading program I had already activated check hands and chronometer) with a white cluster 8P0920931S) that I had purchased. on the internet I manage to find a person who tells me that he could move the data without problems, I contact him and bring him all 2 clusters, he dismantles my red cluster and first of all desolders the resistor O and begins to solder the various wires to read the micronas data with smok bdm jtag connects to the PC and saves the data, I ask him if he could activate the boost and he tells me that it wasn't possible on the 931 and that by trading mine in, he would give me the 932N and I accept, he dismantles the cluster same initial procedure and re-inserts the copied data, then takes the front part of my 931 cluster, changes the holsters and reassembles everything. total time 15 minutes
from that moment the glow plug warning light no longer comes on when it is turned on, the car no longer regenerates the DPF, and occasionally I have various errors in the engine control unit (p1958,p145f,p3139,00819 g65) I reset with vcds and then a few weeks they reappear. I contact him again and he tells me it's not possible until he doesn't answer the phone anymore
(I assume you loaded the S3 software)
I ask you experts if you could help me solve this annoying problem, I would be grateful:ambivalenza::ambivalenza:

[grga59]

cluster has nothing to do with engine dtc-s only if its related on them