5Q0959655D B200000 NEED HELP

[hilton in brazil]

Hello all friends of the group, I need help with the 2014 Golf airbag 5q0959655d with SPC560P50.
Code B200000 and several other codes. If anyone can help me, I would be grateful!

[brfbrf33]

Hello all friends of the group, I need help with the 2014 Golf airbag 5q0959655d with SPC560P50.
Code B200000 and several other codes. If anyone can help me, I would be grateful!

CLEARED >>> HIT THX & REP , go PM clear your pm'ssss , get PASS


HERE FILE : DC FLASHS CLEAR.zip

[hilton in brazil]

LIMPO >>> CLIQUE EM THX & REP, vá PM e limpe suas PM'ssss, pegue o


ARQUIVO PASS HERE: DC FLASHS CLEAR.zip

Unfortunately it didn't work,
there are still 25 bugs that
don't go away, including b200000

[superjet]

5Q0959655D H014-S0385 clear ok

[hilton in brazil]

HELLO SUPERJET
I would like to thank you very much for your willingness to help me!
Your file was almost perfect!
There are only 3 damages left:
B100A11 - ignition device for side airbag, passenger side - short circuit to ground
b101614 - airbag control light off, passenger side - interruption/short circuit to ground
The third,
U110100 - component protection activated
COMPONENT PROTECTION DID NOT EXIST AND NOW IT DOES
I do not have online access here,
is it possible to remove the component protection from the file manually or only online?

[superjet]

do it online.......

[bolonc]

Try.......................................

PASS=PM

[hilton in brazil]

Hello Bolonc
Thank you in advance for your help
Your file solved the component protection error.
I only have two errors now:
B100A11 - SIDE AIRBAG IGNITION DISPLAY, PASSENGER SIDE. SHORT CIRCUIT TO GROUND
B101614 - Air bag control light off, passenger side - interruption/short circuit to ground
This car has a switch to turn off the passenger airbag on the side of the dashboard

the solution found to faults above :
B100A11 - an island that connects one side of the board to the other was broken, shorting a ground track.


B101614 - a 50 nf capacitor shorted at the input of pin 29 of the module in the passenger airbag switch circuit.

I replaced the capacitor and the short went away.
After solving the two problems with the module, it worked.

[fuzz1]

Have you replaced the side airbag? Or just used a resistor? There's most probably three wires in that car instead of the usual two wire. Does the car have three wires there?

[TurkiFalcon]

Hello all friends of the group, I need help with the 2014 Golf airbag 5q0959655d with SPC560P50.
Code B200000 and several other codes. If anyone can help me, I would be grateful!

clear .....

[hilton in brazil]

HELLO FUZZ1
The side airbag here has three wires and is ok.
It is not using a resistor, it is with the original airbag.
I managed to find the two faults.
Both faults were on the module board.


B100A11 - an island that connects one side of the board to the other was broken, shorting a ground track.


B101614 - a 50 nf capacitor shorted at the input of pin 29 of the module in the passenger airbag switch circuit.

I replaced the capacitor and the short went away.
After solving the two problems with the module, it worked.
I would like to thank everyone who helped me a lot.
The Superjet file is ok, but the component protection remained active.
Special mention to the Bolonc file that worked without having to correct the component protection online!

[hilton in brazil]

Hi TurkiFalcon
I managed to finish the job and didn't have time to test your file
but I appreciate your help!
I found two defects on the module board and I've already returned the car.