Skoda Fabia Magneti 036 906 034 BK IAW4LV.C 95080 im*o code?

[sidescan]

Morning, Afternoon, Evening

I have a problem finding the im*o login code from this dump in the ecu.

Ecu is from Skoda Fabia 1.4 036 906 034 BK IAW4LV.C

using im*oreader 5 from another post i got a code of 21675 from hex 54AB but this didn't work,

Can anyone help?

had a look through the forums but this ecu seems a little rare.

Thanks in advance guys.

[umoussa]

Check your file again m8, looks not working, better RAR it instead

[sidescan]

Umoussa

thanks - try this one

sidescan

[steveeprom]

Hi friends in this ecu has not login code inside .

What you need to do? replace the ecu??

[theodor229]

try 08423 its ok!

[sidescan]

Folks

The car is a VW polo 1.4 on a 2001 with separate valeo immo. The original ecu also a iaw4lv was water damaged and the closest ecu i could find was the skoda one.

lastnight I did find 20e7 in the hex and tried 08423 but it said "no" on vagcom - but I may have locked myself out.

Is there a lock out period? eg. 1 minute or 2? perhaps

Can I recode this used ecu via the valeo im*o - the code of this i know works? or do I need the skoda's separate valeo immo code?

This one is a bit confusing.

Help appreciated guys.

sidescan

[steveeprom]

i think is immo 2 you must go in address 25 if the immo3 in the dash go address 17 and then adaptation reset at 00 then save and close go back ignition off then on and the car starts?

[steveeprom]

try only if is immo 2 at address 25 .
In new immo3 not work

[sidescan]

steve

if the ecu is from an im*o3 and polo is im*mo 2 will this be ok,

there is a 14 digit code after the vin in va*com.

and do i adapt on the im*o (25) or the instrument (17)?

Thanks again

Sidescan

[steveeprom]

You must try not problem ,your car has immo box??
if yes try from 25

Have you the car here?

[steveeprom]

14 digit are immo 2 is ok i made many times work try

[sidescan]

steve

The car has a separate valeo im*obox - read the code off the 24c04 with im*oreader5.

Original ecu 95080 eeprom dump didn't have chassis /vin number and when i tried to read im*mo code with im*oreader5 it gave 0829 - valeo code was 6329 and 6329 worked when i logged in.

When i read the 95080 from the skoda ecu it gave 21675, I noticed that the vin number was further down in the hex code and tried the 20e7 (8423) that was infront of the vin but it didn't let me in.

Biggest problem with this is the car is outside the customers house and its one of those jobs that is taking to long - should have done more research first i guess.

Thanks for your help


Dave

[jokersat]

Umoussa

thanks - try this one

sidescan

LOGIN IS 08425

[churry]

LOGIN IS 08425

Hello jokersat


hello.

I have a Vw bora year 2001


Magneti Marelli ECU 036 906 034ds with memory eeprom 95080

Please In that memory address is the pin-code?.

And what programs you use to locate the pin-code?.

I need to reset of inmo


when it used the program immoreader 5 for reads the pin-code.

What converter used to convert the pin-code number from decimal to hexadecimal?.

in my case when you select the ecu and loads the file.

In my case the pin code is repeated in several memory addresses.

It's normal?, thank you very much

Where to save the pin code of this unit ecu?
is true that memory is stored in eeprom 95080?
Or actually the pin-code is stored in the immobox.?
I hope to answer thank you very much.