Register
Results 1 to 1 of 1
  1. #1
    Newbie
    Join Date
    Feb 2023
    Posts
    5
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default Cannot connect to [03 ABS Brakes] with VCDS (Hex V2 cable clone)

    Hello,

    I have a Hex V2 cable (STM32F429 chip). It was shipped with VCDS 22.3.1. I used in the past on a Polo MK5 TDI 1.6 (from 2010), worked OK.

    Few months ago, I had issues with the ABS (the 3 related lights show up on the dashboard).

    Untitled3.png

    No matter what I tried, I couldn't connect to the ABS controller (VCDS says "No Response from Controller" after 3 attempts).

    2024-11-26 11_58_13-.jpg

    I checked the fuses and updated VCDS to 24.5 (CB: 0.4643.4 FW: 0.256), still didn't work.

    Untitled.png

    I concluded the ABS controller was dead and took it to a repair shop.
    Turns out the ABS controller was fine, it was a wheel sensor which was faulty. The mechanic could connect to ABS controller without any issue (with a very expensive VW kit)

    Today I got the 3 lights again. Im pretty sure another sensor failed. I plugged VCDS and again, I can't connect to ABS.
    Auto scan works fine (except it can't connect to ABS), I can connect to engine ECU or other controllers.

    It's unclear to me what wrong with VCDS or the cable. Is this a well known issue ?

    EDIT: here is the Auto-Scan result (engine was off) :

    Tuesday,26,November,2024,12:12:12:16365
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 24.5.0.0 HEX-V2 CB: 0.4643.4
    Data version: 20240429 DS355.0
    www.Ross-Tech.com

    VIN: **EDITED** License Plate:

    Chassis Type: 6R-VW25 (6R0)
    Scan: 01 03 08 09 15 17 19 25 44 56 61

    VIN: **EDITED** Mileage: 276630km-171889miles


    01-Engine -- Status: OK 0000
    -------------------------------------------------------------------------------
    Address 01: Engine
    Cannot be reached

    -------------------------------------------------------------------------------
    Address 03: ABS Brakes
    Cannot be reached

    -------------------------------------------------------------------------------
    Address 08: Auto HVAC (J301) Labels: 6R0-820-045-9AP.clb
    Part No SW: 6R0 820 045 J HW: 6R0 820 045 J
    Component: Climatic 25 0660
    Revision: 00 11 25
    VCID: 353721C935428872B45-8060


    1 Fault Found
    00705 - Relay for Coolant Fan; Stage 1 (J279)
    009 - Open or Short to Ground
    Freeze Frame:
    Fault Status: 01101001
    Fault Priority: 2
    Fault Frequency: 254
    Reset counter: 49
    Mileage: 271470 km
    Time Indication: 0
    Date: 2019.04.19
    Time: 20:19:52




    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519) Labels: Redir Fail!
    Part No SW: 6R0 937 088 HW: 6R0 937 088
    Component: BCM PQ25 Re4 H46 0304
    Revision: BU046001 Serial number: 0104 030100005
    Coding: 24B02BBF08A10000003001303D2B0CD08F00610F7E06004920 0000000000
    Shop #: WSC 124697 483 00190
    VCID: 7BA3F7F153E69E02021-802E


    Subsystem 1 - Part No SW: 6R0 959 801 R HW: 6R0 959 801 R Labels: 6R0-959-801.CLB
    Component: J386__TSG_FT 006 0902
    Serial number: KU0-KU003.02.1013272
    Coding: 48BC30


    Subsystem 2 - Part No SW: 6R0 959 802 T HW: 6R0 959 802 T Labels: 6R0-959-802.CLB
    Component: J387__TSG_BT 006 0902
    Serial number: KU0-KU003.02.1010826
    Coding: 48BC30


    Subsystem 3 - Part No SW: 6R0 959 811 F HW: 6R0 959 811 F
    Component: J388__TSG_HL 006 0902
    Serial number: KU0-KU008.02.1010993
    Coding: 48BC32


    Subsystem 4 - Part No SW: 6R0 959 812 F HW: 6R0 959 812 F
    Component: J389__TSG_HR 006 0902
    Serial number: KU0-KU009.02.1016924
    Coding: 48BC32


    No fault code found.


    -------------------------------------------------------------------------------
    Address 15: Airbags
    Cannot be reached


    -------------------------------------------------------------------------------
    Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
    Part No SW: 6R0 920 861 D HW: 6R0 920 861 D
    Component: KOMBI H03 0205
    Serial number: 00000000000000
    Coding: 140A00
    Shop #: WSC 124697 483 00190
    ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04052
    ROD: EV_Kombi_UDS_VDD_RM09_004_VW25.rod
    VCID: 363526C528C4836ABDF-8062


    No fault code found.


    -------------------------------------------------------------------------------
    Address 19: CAN Gateway Labels:. 6R0-907-530-V1.clb
    Part No SW: 6R0 907 530 B HW: 1K0 907 951
    Component: J533 Gateway H28 0020
    Revision: H28 Serial number: 100210F1000097
    Coding: 7D021D00080000000002
    Shop #: WSC 124697 483 00190
    VCID: 323D1AD5C82C9F4A917-8066


    No fault code found.


    -------------------------------------------------------------------------------
    Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
    Part No SW: 5K0 953 234 HW: 5K0 953 234
    Component: IMMO H03 0205
    Serial number:
    Coding: 000000
    Shop #: WSC 00000 000 00000
    ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03006
    ROD: EV_Immo_UDS_VDD_RM09_VW25.rod
    VCID: 6A8DC2B52CFC178AE97-803E


    No fault code found.


    -------------------------------------------------------------------------------
    Address 44: Steering Assist
    Cannot be reached


    -------------------------------------------------------------------------------
    Address 56: Radio (J503) Labels:. 5M0-035-1xx-56.clb
    Part No SW: 5M0 035 156 B HW: 5M0 035 156 B
    Component: Radio H21 0057
    Revision: R0000000 Serial number: VWZAZ1K8595916
    Coding: 0000020002
    Shop #: WSC 124697 483 00190
    VCID: 2809F8BDF2F0E59A3F3-807C


    No fault code found.


    -------------------------------------------------------------------------------
    Address 61: Battery Regul.
    Cannot be reached


    End----------(Elapsed Time: 01:14, VBatt start/end: 12.1V/12.1V)-----------
    Gateway Installation List:


    01-Engine -- Status: OK 0000
    03-ABS Brakes -- Status: Malfunction 0010
    04-Steering Angle -- Status: OK 0000
    08-Auto HVAC -- Status: Malfunction 0010
    09-Cent. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    25-Immobilizer -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    56-Radio -- Status: OK 0000
    61-Battery Regul. -- Status: OK 0000
    Sometimes, I cannot run Auto-Scan, I got "Function not supported by the gateway".
    When it happen I can still access other controllers (Eg: engine).
    It seems that plugin off and restarting VCDS fix the issue.

    2024-11-26 12_13_27-VCDS Release 24.5.0_ Auto-Scan.jpg
    Last edited by Tigrou2; 26th November, 2024 at 03:43 PM.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.