clone edc17CP14

[credoline]

Hi friends. I need help to clone original ecu 0 281 014 235 Bosch 03L 906 022 B Audi A4 2.0 TDI EDC 17CP14 to donor ecu 0 281 015 823 Bosch 03L 906 022 LS EDC 17CP14. All files are attached.
Thank you

[mvekaz]

0 281 014 235 = VW BOSCH EDC 17CP14-3.2

0 281 015 823= AUDI BOSCH EDC 17CP14-3.4

[credoline]

What to do with flash ? Rewrite complete from old to new?

[mvekaz]

Yes, but as you can see your original ECU type is not same as donor. So, maybe it will work, maybe not. Also, you can try to flash frf file in attachment.

[credoline]

I know that, but customer found couple of ecu-s, not any was the same numbers and software as original.

Yes, but as you can see your original ECU type is not same as donor. So, maybe it will work, maybe not. Also, you can try to flash frf file in attachment.

[Smart66]

All EDC 17 have OTP sector which can't be changed. Old ECU's flash can't be used dirctly on donor ECU's

[mvekaz]

Yes, this is transfer of immo data (VIN/PIN/CS/MAC) to a donor ECU. So you have to be sure donor unit is 100% compatible with original.

[Smart66]

Report results whether it works or not. Sometimes car can start but driving performance is poor

[credoline]

I am not tried, because flash data layout is not the same regarding OTP data and i can not transfer flash data. And i am give up. Customer will search for another second hand ecu the same ecu as original.

[penta2009]

ok i can make the clone file to start the car

this clone files have 1kb+ because the software make it

write first epprom ori in donor and next write this file in flash