Touran Edc16 eeprom location

[calin_bm]

Hello friends, I need help regarding immo on a touran 2004 with 1,9L engine,after several things tried to start the car,now i must do Immo off inside ecu,but i don't know the location of the eeprom.Can anyone help me with a picture to see what must be done?Because i can't take off the circuit board from the metal plate.
Thank you.

[umoussa]

it's 95320

under the controller sticker this means you have to take the board out of the metal body of the controller from both sides

[cavemanf]

yer, there are 6 screws to undo, then a long flathead screwdriver
looking at the top. start on the rhs, lifting the plate, you have to break the silicon seal.
then use BDM100 to extract the E2prom dump, will be 400k
when using clone BDM100, the instructions they supply are quite good. even if you put the connector the wrong way, it senses and cuts of. --i did this. but all good and performed immo off on my edc16u1

[diga1]

do not twist the plate vhen removing it you will kil ecu forewer

[calin_bm]

why i have to use BDM to read eeprom?i have readed with upa,is 95320 inside,yes?

[pepi]

why i have to use BDM to read eeprom?i have readed with upa,is 95320 inside,yes?

If you use BDM there is no need to open ECU on booth sides.