VAG ESP8.2i ESP9.0i ESP MQB, MK60EC1, Conti MK100 ABS Long Coding

[Edber]

Or just not waste your time as this is incorrect in so many parameters and content so you cannot even write it to your ABS unit.

Yes you are right and you also know that is not so easy to make correct code without additional information about car and equipments. But people trying to find these codding...and I'm just trying to help....correct code from the first try is very hard to match.

[ahmet9x]

Hey there,

I currently have a 2.0 TDI Touran with 81kw/110hp

Can you help me get the coding of the ABS/ESP unit

Heres my autoscan:

[Edber]

Hey there,

I currently have a 2.0 TDI Touran with 81kw/110hp

Can you help me get the coding of the ABS/ESP unit

Heres my autoscan:

Try this codding...after you try....please report me to PM about results...

0CEA6AA034252372477F060840CA2930562CC4E26002947518 62F078C202420000040212121212B235351919323200

[mati1234]

Hello.
Can you help me with long code golf 7 2014year esp mk100IPB

[Edber]

Hello.
Can you help me with long code golf 7 2014year esp mk100IPB

You can try this long codding. Please report results....


1. 01FA62A124260975037B060041CB2580462490C06082A4F300 400078C002
1. 01FA62A124260975037B060041CB2580462490C06082A4F200 400074C002

[mati1234]

Thanks for help.
Coding accepted first and second. I calibrated the sensors. I have errors and the esp and airbag lights on and autohold

[Edber]

Thanks for help.
Coding accepted first and second. I calibrated the sensors. I have errors and the esp and airbag lights on and autohold

OK now try this:

01FA62A124260975037B060041CB2580462490C06082A4F300 420074C002

and see what errors you have...

[mati1234]

The situation is as follows:
The airbag errors have off but the ABS errors is on.
4254 - Internal Fault
B200F F0 [10001001] - -
8299 - Databus
U1121 00 [00001001] - Missing Message

In coding 1, ESP lights on and autohold faults
In coding 2, only ESP lights up
In coding 3, ESP lights on and fault: vehicle power steering system.

I think that coding no. 2 is OK. I am afraid that the purchased ABS module is damaged and causes error 4254 - Internal Fault B200F F0

[Edber]

After you input codding number 3.....did you make basic settings of g85, g201 and other abs sensors????

I leave you here one more code...

01FA62A124260A75037B060041CB2980462450C0608294F200 400074C002

[mati1234]

Sorry, but I misinterpreted the error regarding 3rd coding. It's about hill hold like in the picture.
In coding no.4 only esp lights on and of course tire pressure but it always goes out at the end.


What do you think, does this error 4254 - Internal Fault B200F F0 mean bad coding or module damage?

[mati1234]

OK, now I know everything.


I installed the new module to the old block myself.


Now I installed the new module and the new block (complete) and I no get error 4254 - Internal Fault B200F F0 . The Esp lights off.


I'm going to change the whole module and bleed the brake. I'll let you know what and how

[tferenc]

Hello,
On a VW Polo 2010 I have disconnected the dashboard and the ABS control unit lost the coding.
Can somebody calculate the coding for me?
I have tried these codes and not worked:
210224C24100A2E7DE5DDB16BE08FF400000 - I have calculated this according to a description.
210224C2217200B7842D24E684D800400000 - A software calculated it (hatchback).
510224C2217200B78A2D24E684D800400000 - A software calculated it (sedan).
2124210084248400401100 - I have bought this code from an online service, but this seems to be too short, I have not tried it yet.
The autoscan is attached.
Thanks in advance.

[Edber]

Hello,
On a VW Polo 2010 I have disconnected the dashboard and the ABS control unit lost the coding.
Can somebody calculate the coding for me?
I have tried these codes and not worked:
210224C24100A2E7DE5DDB16BE08FF400000 - I have calculated this according to a description.
210224C2217200B7842D24E684D800400000 - A software calculated it (hatchback).
510224C2217200B78A2D24E684D800400000 - A software calculated it (sedan).
2124210084248400401100 - I have bought this code from an online service, but this seems to be too short, I have not tried it yet.
The autoscan is attached.
Thanks in advance.

No, last code which you post will not work, also like others....

Try this code....after that make basic settings for sensors....Report about results and dtc error after that

210224E3217200B7842D24E684D800400000

[tferenc]

Thanks, monday I will post the results.

[MarcaEV]

Hi!
Can someone help me with the long code, GOLF V 2009, the car has TMPS, VCDS full scan is here ...