ETL Programmer705

**igor6997** · 23rd May, 2010, 02:11 PM

I need dump for atmega 8515L ETL 705 Programmer.Thanks..

**deffc0n** · 23rd May, 2010, 02:30 PM

Price 3000 $

**PremierD** · 23rd May, 2010, 02:31 PM

Originally Posted by deffc0n

Price 3000 $

Not from you I hope mate ...................?

**igor6997** · 23rd May, 2010, 03:13 PM

done here that need

**igor6997** · 23rd May, 2010, 03:17 PM

Welcome to dump that needs

**bram380** · 23rd May, 2010, 03:48 PM

Thank's to igor6997

ATmega8515L hex format:

**elchip** · 13th October, 2010, 10:49 AM

And here is PCB which I was copy 1:1 as original PCB.

01 ETL705.RAR

Regard's to all

**cosmin12345** · 17th December, 2010, 04:56 PM

Originally Posted by elchip

And here is PCB which I was copy 1:1 as original PCB.

01 ETL705.RAR

Regard's to all

hello guys is there anyone with homemade interfce working.I will try it in the next day because i really need it and its expensive for my .Worst is that i cant buy from other country,its to complicated.

i will report functionalityy

**cosmin12345** · 17th December, 2010, 05:57 PM

Originally Posted by elchip

And here is PCB which I was copy 1:1 as original PCB.

01 ETL705.RAR

Regard's to all

hy again can you please upload again pcb or any schematic because file not working.

thanks

**raptors** · 9th February, 2011, 06:57 PM

I noticed that this board is not good work base for d-sub25 conector.This lpt jack can not be mounted on the PCB because it has 27 holes. I made a complete unit, but I do not know a couple of problems that solve so I need help. I am interested in how to connect the LPT port, which component is between the legs 4MHz crystal, if the transistor is set before 7805 may bc317 and I think that missing a jumper to give 5v on ATMEGA8515. If it worked on XP. Thanks.

**dimitar** · 9th February, 2011, 11:35 PM

Originally Posted by raptors

I noticed that this board is not good work base for d-sub25 conector.This lpt jack can not be mounted on the PCB because it has 27 holes. I made a complete unit, but I do not know a couple of problems that solve so I need help. I am interested in how to connect the LPT port, which component is between the legs 4MHz crystal, if the transistor is set before 7805 may bc317 and I think that missing a jumper to give 5v on ATMEGA8515. If it worked on XP. Thanks.

Dont bother manufacturing these shit mate it has plenty faults but the dump is good. Use it to repair your china clone

**lagas** · 30th March, 2013, 09:44 PM

What LPT cable use to this programmer? 1:1 or some special? Programmer have only 5 wires.

Try 1:1 reading led not flash., have some info in eprom areas, but not correct.

Use dell 610 with LPT, on ibm at all not works
Both with xp

What pc you using guys? And have working solution?

**gadroulll** · 31st March, 2013, 08:32 AM

you need windows 98 for lpt

**lagas** · 4th April, 2013, 11:37 AM

ok, result is

dell 610/600
win xp sp3
LPT1

on ETL change crystal, and reprogram atmega, and start work
with IBM t30 not working, but still trying.

**Sarkan** · 14th February, 2014, 09:54 PM

Is there a correct configurations bits for Atmega8515.I tried to fix my programmer with a description of the Bram380
image but without success.When i connect the controller to the power 1 and 2 LED does not light up at all.LED 3 after 1 second glowing red while, and turns green.And that's all.