Tut on how to fix NO CA on all DM800HD

[dctyper]

Quick tut to repair NO CA on all DM800HD

Please use patched version Dreamup here

1. connect via serial using NULL Modem cable and Ethernet to router and pc.. ( if you don't have a Null modem cable you can purchase here null modem cable found EDITED.. ANYWHERE

2. load patched version of dreamup, select your com port and then click connect and power on dm800

3. when initialised it will display http serial mode on lcd and show dhcp ip once ip is displayed dreamup as served its purpose and now its in flashmode

4. log into webshell on pc using the 192.168.x.xxx address on LCD disply and flash as normal

much simpler way, just use normal dreamup and flash a lower bl version ie bl72 found in downloads, takes less than 30 secs

dc