UPA USB sample script wanted

**hoangtu** · 27th November, 2011, 01:51 PM

Dear hcip.
please forgive for my english language.
I'm having problems with the honda PCX (24c04) I tried but could not calculate the results. Can you help me push it on me 0km or calculation methods.
thank you very much.

**Szasza** · 27th November, 2011, 05:22 PM

Thx to UPA script.

**lpv2010** · 27th November, 2011, 11:13 PM

hello anyone have a script for 3 abs renault megane?
Or someone has to sell?
Thank you.

NO EMAILS PLEASE

**pinkfloyd5eg** · 28th November, 2011, 12:14 AM

[quote=lpv2010;1349553]

hello anyone have a script for 3 abs renault megane?
Or someone has to sell?
Thank you.

No selling on DK forum mate, only ask for help

**lpv2010** · 28th November, 2011, 03:11 PM

ok. I'm sorry. but if someone can help.

**infobadr** · 28th November, 2011, 10:30 PM

UPA can't R and W motorola 68hc11e mask 4E28B

--------------------------------------------------------------------------------

i can't read this mcu motorola 68hc11e mask 4E28B
for cu lucas (406 2.1l for 1996)
I have this connections

1 unused 0.00v
2 txd 3.77v ok
3 rxd 4.80v ok
4 unused
5 vss 0v ??????????????????
6 modb 0.05v ok
7 reset 4.79v ok
8 moda 0.00v ok
9 vdd 4.85v ok

but error found devese mc68....

i have externe +12v in pin 48 and -12 in 55pin

thanks frends

**newgeniehex** · 28th November, 2011, 10:55 PM

Originally Posted by infobadr

UPA can't R and W motorola 68hc11e mask 4E28B

--------------------------------------------------------------------------------

i can't read this mcu motorola 68hc11e mask 4E28B
for cu lucas (406 2.1l for 1996)
I have this connections

1 unused 0.00v
2 txd 3.77v ok
3 rxd 4.80v ok
4 unused
5 vss 0v ??????????????????
6 modb 0.05v ok
7 reset 4.79v ok
8 moda 0.00v ok
9 vdd 4.85v ok

but error found devese mc68....

i have externe +12v in pin 48 and -12 in 55pin

thanks frends

HELLO
remove the mcu and remove the varnish whit the acetone and you can read and write whitout problem
i have alredy read this mcu in the ecu 406 2,1 td
if you remove don't forget to use cristal 4 mHZ
and if you want immo off don't forget to remove keypad
regard

**infobadr** · 29th November, 2011, 05:36 AM

dear newgeniehex
it a upa not xprog
and which pin to put cristal

thanks

**infobadr** · 29th November, 2011, 07:17 PM

hello anyone have solution ?????? . PLS

**Tereksaz** · 29th November, 2011, 08:03 PM

Originally Posted by infobadr

hello anyone have solution ?????? . PLS

Ways is one!
MAke test pcb for it MCU HC11 with cristal on board and read UPA.
Some days ago I am make test pcb For MCU Renesas M32c m80855FH ( he is stand to Volvo CEM)
connect to proger and read .
All ok!

**motorsport** · 29th November, 2011, 09:30 PM

hello i need script upa dash master 3 93C76
in dump have 36868KM many thanks

**PCM** · 30th November, 2011, 02:32 AM

Originally Posted by motorsport

hello i need script upa dash master 3 93C76
in dump have 36868KM many thanks

You could check if works well on these boards?

This script is and prepared according to the file that went up.

will have a photo of this board to develop a script in Version 1.2 of UPA?

This file was read which rose in 8 or 16 bits?

Thanks .... I hope Comments

**newgeniehex** · 30th November, 2011, 07:55 AM

Originally Posted by infobadr

dear newgeniehex
it a upa not xprog
and which pin to put cristal

thanks

hello
look the datasheep
regard

**infobadr** · 30th November, 2011, 08:03 AM

THANKS newgeniehex

**motorsport** · 30th November, 2011, 11:00 AM

Originally Posted by PCM

You could check if works well on these boards?

This script is and prepared according to the file that went up.

will have a photo of this board to develop a script in Version 1.2 of UPA?

This file was read which rose in 8 or 16 bits?

Thanks .... I hope Comments

many thanks my friend i dont remember if in 8 or 16 bit and dont have picture this dash have done from one year now
the sript is finish ? and checksum?