try to use another browser or reset your browser and try again
try to use another browser or reset your browser and try again
greetings to all...
i've a dreambox dm800 HD PVR..
i just tryied to flash it with
OoZooN-Image-dm800-20110801
using
universal DreamUp v1.3.3.7
and a
null modem cable...
it all seem to go ok it flashed returnig good in the dreamUp but when i restarted the dream box it not boot.. instead gave an error
ERRO1: NO CA FOUND..
i've tryed reflashing but no luck.. it detects.. but doesn't flash anymore..
gives the same error...
what can be done to fix this..
all expert help will be kindly apreciated..
Last edited by zakarate; 31st August, 2011 at 01:09 PM.
hey i've followed the instruction in the post:
Navigation ?Digital Kaos > Cable > Cable Dreambox ? DM800 NO CA FOUND/FILE TO BIG FIX
and now it seems to be booting...
~flash/vmlinux.gz...
but it shows nothing on the TV (scart plugged)
any suggestions???
Last edited by zakarate; 31st August, 2011 at 02:00 PM.
Hi Guys & Gals Just tried flashing my 800HD which has BL 72 (don't know what Sim as it isn't marked but the above came up on screen on a previous flash session) with the Blackhole_12_72 software using Dreamup V2009 patched. When I connect box it says "Box is in networked HTTP mode" is that correct please? Then go to flash button in Dreamup load up the above S/W and the Dreamup screen then says the following: Uploading file to box, Box is flashing from it's memory, OK flash copy succeeded. Then a seperate "pop-up box" comes onto the screen saying "Box was flshed successfully" so I hit the OK button. I then hit the "disconnect" on Dreamup and when I unplug the box and restart it all I get is the words DREAM multimedia showing in the screen of the 800HD but nothing else appears to be happening!! What am I doing wrong please? Forgot to mention when the "box is flashing" the yellow light on the RJ 45 socket (Network connection) is solid and the green one flashes and the 800HD screen is showing "Dream Multimedia then my IP address of the box and Serial Mode" is that also correct please?
Thanks for any help/replies as this is driving me insane
THINK I'VE GOT THIS SORTED - THANKS TO ALL
Last edited by Decoder; 9th October, 2011 at 05:57 PM.
Can someone please help?
http://www.digital-kaos.co.uk/forums...a-error-70341/ yes welcome to dk flash with dreamup
Thank you for the reply.
I am a newbie here. I bought a DM800 Clone. I was trying to Flash it. Ended up with the Err01: No CA Found. I went through a few reads on Google. But no success.
What I have tried:
I connected the Null Modem (Which I made by Cutting a Serial Cable and joining the red to green and vice versa, and the black to black)
I opened DreamUp 1.3.3
Selected Com1 option
Entered in the PC IP and an IP for the Dream Box
Clicked Connect
Connected the DM800HD. (Got the error Err01: No CA Found)
Dragged the Enforcer onto Dreamup and click on Flash
Chose a File - Gemini-5.1-OE1.6-dm800-SSL70_TS
I get the error, File too big
What am I doing wrong here.
All your help will be highly appreciated.
I have been stuck with a dead box for more than a week now.
Thanks.
I opened DreamUp 1.3.3
Selected Com1 option !(must 115200 bitrate )
Entered in the PC IP and an IP for the Dream Box
Clicked Connect
Connected the DM800HD. (Got the error Err01: No CA Found)
Dragged the Enforcer onto Dreamup and click on Flash
Chose a File - Gemini-5.1-OE1.6-dm800-SSL70_TS
I get the error, File too big
SO put new sim firm ! Find Backup-SSL76D-sifteam149-ping800.zip or dm800hd sim201 SSL76D.rar
if not work i send more ..
try the patched dreamup mate , , make shure you got the right image for your sim _
Hi guys, i have just taken delivery of a DM800 Clone and bought it on the pretence it may be f**ked.
i am however optimistic and wish to move forward.
i have seen the "#72" during bootup & "20090303" I have also seen on my screen "nabilosat" and "blackhole" also enigma2.
I can connect the dm800 clone via my router/pc and the box gets an IP address.
I have also downloaded some random .nfi images but after reading on here about getting the right sim version etc, i thought better of just chancing a flash via web browser and decided to ask some questions here.
1. how do i find my sim. version number please?
2. i have also seen that there appears to be some recommended images on here that are good.
3. what is the most reliable method for flashing to these boxes.
4. What are bouquets and what purpose do they serve.
Im in the UK and i have an old sly dish up. I am fairly tech seavvy and confident, but i AM AN ABSOLUTE NOOB @ all this lark. I am however looking forward to learning and sharing what i gain here. I have searched this thread but not found what i need to know, please point me in the direction of another thread if im posting in the wrong zone here guys n gals.
best regards
Look under the box and see if it says sim2 on a sticker
Andy,
Hi Andy, thanks for ther reply, unfortunately i have looked underneath the box, the box it came in and since my first post, i have actually opened the main box and see a white sim card but cannot get it out. On the back of this card it had "US 2" then underneath that 4 other numbers. The gold chip bit actually looked more complex than the pictures on here ive seen of sim 1, so in a totally uneducated guess, im gonna guess 2 but that is all it is-a guess.
I have also noted that i think i have bootloader version #72,
Do i need to upgrade this? How do i do that if necessary please?
again, thanks for your early reply.
Hi all
newbie here who just knackered his Dm800 somehow.
This post seems to be the way to retrieve situation so am going to try.
TIA
Hi
You are ME!
I have the exact same situation as you though mine was ok until about 20 mins ago but tried to update it (dope ) and now it's knackered. Am technically savvy ( I thought ) until I got into this lark!
Hi Guys Just tried flashing my 800HD which has BL 72 (don't know what Sim as it isn't marked but the above came up on screen on a previous flash session) with the gemini2-440-dm800_ss70 modified by jams01.nfi software using Dreamup V2009 patched. When I connect box it says "Box is in networked HTTP mode" is that correct please? Then go to flash button in Dreamup load up the above S/W and the Dreamup screen then says the following: Uploading file to box, Box is flashing from it's memory, OK flash copy succeeded. Then a seperate "pop-up box" comes onto the screen saying "Box was flshed successfully" so I hit the OK button. I then hit the "disconnect" on Dreamup and when I unplug the box and restart it all I get is the words DREAM multimedia showing in the screen of the 800HD but nothing else appears to be happening!! What am I doing wrong please?
Bookmarks