Peugeot ABS Problems

[Meat-Head]

Sorry my friend I dont think you understand and Im afraid you are not of a lot of help on this subject.
Thank you anyway

Whoa hang on, Digital-Kaos is the best website in the world, if nobody can help you from here then nobody can without seeing the car. There are several posts on here, unanswered

Are you guys in the UK if not shut up because you do not know the law and as an ex policeman I do.
Yes my next option is to find a trailer if nobody has any other ideas which I can try.
So unless you have any ideas regards ABS and some things I could try I don’t need your input or sarcasm

Whoa, hang on, Meat-Head-Motors are on first name terms with
the judges, (court-house) and we have never been in the force (not likly to either )

Not wanting to offend anybody but as an ex pig would have though
you would no better, trying to offend people.

M-H-M recently went to Birmingham* where they have people with different 'software', They had no problems with 'Team Meat' looking at there car, and 'Team Meat' had no objections with them being from a differeant country, a fist in their faces with spanner or screwdriver motionswas excepted by all there.

*Not forgot about follow up thread, been busy

So ROUGHLY where are you in the UK?
I'm from Meat-City, (between London and Scotland) is that near to you?

[mrrigga]

Hi Golfmk1
Thanks for your input have a few things to try now Maybe the unit is faulty. A friend thinks he knows of a guy with one of these Peugeot Planet tools so who knows may get a scan yet.
Cheers

[mrrigga]

Whoa hang on, Digital-Kaos is the best website in the world, if nobody can help you from here then nobody can without seeing the car. There are several posts on here, unanswered




Whoa, hang on, Meat-Head-Motors are on first name terms with
the judges, (court-house) and we have never been in the force (not likly to either )

Not wanting to offend anybody but as an ex pig would have though
you would no better, trying to offend people.

M-H-M recently went to Birmingham* where they have people with different 'software', They had no problems with 'Team Meat' looking at there car, and 'Team Meat' had no objections with them being from a differeant country, a fist in their faces with spanner or screwdriver motionswas excepted by all there.

*Not forgot about follow up thread, been busy

So ROUGHLY where are you in the UK?
I'm from Meat-City, (between London and Scotland) is that near to you?

Hi Meathead
Yep man you are known about town. Im in south east Nr Southend Im formally from the smog (London) If I was close to you would ask you to take a peep.
I am not out to offend as I explained to Oldford.
Await your follow up

[Meat-Head]

Hi Meathead
Yep man you are known about town. Im in south east Nr Southend Im formally from the smog (London) If I was close to you would ask you to take a peep.
I am not out to offend as I explained to Oldford.
Await your follow up

WOW didn't realise M-H-M were that well known.

Had a word with the boss and we are unable to come out and look at your vechile because you are 0.1 mile over the max distance we can travel.

Maybee some other members on here who are nearer could assit you.

Make sure you pay them well, and have plenty of money ready.

Could suggest member on here who would sting you quite happily (?150 to REMOVE a partly remove cat 1 alarm), but sadly that user is to far away from you, looking at his profile.

If you find the fault(s) then let us know

Thanks
Meaty.

[nice1111]

Try doing the reboot procedure for the BSI unit, to do this you have to have bonnet open and doors closed (will become clear), leave for at least 10 mins then disconnect battery, leave for at least 3 mins before reconnecting battery and then reach through window and switch on the main lights (do not open door so now you know why window should be already down), once lights are on then switch on ignition and sequence is complete, just incase your wondering this is the correct method of rebooting the BSI unit and can sometimes solve quite a few eletric probs with these, the BSI on peugeut is notorious for getting faults and glitches, i have to say though you mentioned the speedo dont waork and you have just fitted a new cluctch so did you plug the speed sensor back in on the gearbox????, , the abs has nothing to do with the speedo, the 307 does suffer from rear abs sensor failures (for some reason mostly on the nearside rear but both rear sensors are prone to losing signals because the backblack rusts where they bolt on and the rust pushing out alters the airgap from the abs ring (part of the bearing on the rears), its critical to get the gap right on the back sensors and may involve a little playing around and usually scrapping off the rust after removal of the sensor, i have a feeling u might ask if i am a pug tech so i will say now that i am not but have seen plenty of these through our workshop

[laldog]

Alas i too am too far away to give a free code read and a free fix. What a stinky attitude to a guy who was trying to help you. You have to remember we cant all supply you with a silver bullet and modern motor cars are a different kettle of fish to the points and plugs of yesteryear.
So please before you shoot down a well respected and helpful member have the decency to think a little,then you would not need to apoligise.
Oh and by the way in the UK it is called a sorn.

[bouncycheque]

Alas i too am too far away to give a free code read and a free fix. What a stinky attitude to a guy who was trying to help you. You have to remember we cant all supply you with a silver bullet and modern motor cars are a different kettle of fish to the points and plugs of yesteryear.
So please before you shoot down a well respected and helpful member have the decency to think a little,then you would not need to apoligise.
Oh and by the way in the UK it is called a sorn.

Theres a few Ilexa boys on here then!!!

[Ashraf6119]

Theres a few Ilexa boys on here then!!!

YES!!!!!!!!!! AND THEY ARE MASTER TECH BOYS

Ash

[laldog]

Bouncy cheque,mmmmmmmmm!!!! ha ha!!!!

[bouncycheque]

Bouncy cheque,mmmmmmmmm!!!! ha ha!!!!

You got it, Matey!!!