Originally Posted by
tspt88
ks9799, i can see that u r trying very hard to get the both boxes to be identical, however, i feel that if it is still working just bear with it , cos flashing of the new firmware might brick your box into unuseable stage. unless you are like me prepare to thrown it away, that you may try.
As it was donkey years ago, I also forgotton how i manage to save the box, so just recall :
WARNING : YOU MIGHT BRICK YOUR BOX !!!!!
1. U must get a null cable (without it, no way u can flash the SW) ,try find a old computer that equiped with the serial port.
2. download the SW from post #62,67, 69.
3. instruction DL from post #73
4. follow the instrcution step by step, but do not power on the box
5. after the step 6 (the instruction step), turn on the box, the TV set should show the progress of the upgrading.
6. when complet, it will show the upgrade sucessful.
7. reboot.
I m trying my best to recall , so some steps could be missed. so u must be prepare if it brick. if so, just repeat the above steps with another image file.
Pls note the above is to upgrade the firmware not for backup of the box.
Good luck ! m8.
Bookmarks