[29f400 with willem]

[marcoco]

Hi,i have to reprogramm a flash 29f400 with pbc 4.5 willem.

This is my willem

http://img101.imageshack.us/img101/6...prompcb502.jpg

and this is the tsop 44 adapter for 29f400

http://img12.imageshack.us/img12/146...154ad8b684.jpg

wich is the correct position or memory and adapter on willem pbc,please?

[rsibiza]

Hi,i have to reprogramm a flash 29f400 with pbc 4.5 willem.

This is my willem

http://img101.imageshack.us/img101/6...prompcb502.jpg

and this is the tsop 44 adapter for 29f400

http://img12.imageshack.us/img12/146...154ad8b684.jpg

wich is the correct position or memory and adapter on willem pbc,please?

Your flash has a dot on one corner,check if you have dot on your adapter for the 29Fxx,if there is no dot on adapter,turn you adapzer with the pinheader bridge upside,so it will be same side as zif socket lever,and the dot has to be down left,turned to you,but i will check at home to be sure.

[skyneter]

check this

[ahadi]

is there any way to read 29f400 tsop44 using wellon vp-280 , program list just support 48 pin

[sogaro]

Everytime i use this to rread this type if chip, my laptop restarts

[mavi]

Hi,i have to reprogramm a flash 29f400 with pbc 4.5 willem.

This is my willem

http://img101.imageshack.us/img101/6...prompcb502.jpg

and this is the tsop 44 adapter for 29f400

http://img12.imageshack.us/img12/146...154ad8b684.jpg

wich is the correct position or memory and adapter on willem pbc,please?

Hello

For these adapters are very complicated.
because you have bad contacts in pins.
My advice is to use adapter where you can solder pins, and has no bad contacts
Correct way for the band is the red line on the adapter and clk ck in willem

[majkellondek]

This is what you need
http://www.gotronik.pl/adapter-konwe...llon-p-11.html

[daniersms]

Maybe too long ago...............

[morgano]

Lol, only six year old thread.

Bad if he haven't solved the issue since then