I manage to connect bdm 100 with cracked winols 1500 but only last week. Until now I use a older version of bdmtogo software which allow me to import in cracked ols. Last week a friend told me that if I will install last version of bdmtogo software and install the bdm drivers the winols will work with bdm 100 directly. And that is what I do and work 100%
Last edited by tehnosoftex; 5th July, 2010 at 07:41 AM.
You are giving the info or you are asking?
If who needs .bin from 93?93 and motorola write my. I will lay out. ver 1255
Already posted in another thread the Atmel and Motorola MCU entire read out for people who needs to program the device.
Also inserted the update software to flash the BDM.
Regards,
Nuno
Please. Could that thread?
Thanks mate.
I have this error. Is the solution in post one the right for me.
Interface comunication error
+12Vcc power error or Communication error
And ist this the right connection for Bosch ECU and BDM 100 clone
Now i have this errror
Mpc family error x00000000
+12Vcc power error or Communication er
hi do you sendme the pw please many tanks in advance
Now i have this errror
Mpc family error x00000000
+12Vcc power error or Communication er
I have that same problem. I change this resistor q1 and q2.
I read eeprom maybe someone check?
Have you try it on an other ECU
My ECU was fault, this was the mistake by me
Hi do you know if one or both are npn or pnp types
i/e what did you replace with?
good work Regards John
Have you try
carcode (21st May, 2021), kaziukas1958 (15th August, 2022), mexanico1971 (2nd September, 2017), scoot (22nd May, 2014)
Bookmarks