type 46 copy is on eletronic head and you need the car to do this job .
cj
Hi all,
Yes, Fallen is right, NONE OF THE CLONES CANNOT COPY 4D TO JMA TPX2 !!!!
Today I had some time and could look arround on the internet.
I'm interested in Code Reader 2 or Zed-BULL clone which can copy 4D to TPX2.
Zed-BULL does not work without the internet and access login !!!
On Russian website very informative descriptions are available about these key programmers.
They clearly tell you that these tools cannot copy 4D to TPX2.
I have uploaded two descriptions on Code Reader 2 compare them.
Regards,G
PS: I got an offer for original Zed-BULL from a Hungarian distributor.
The price is 1700Euro+VAT this includes ( 4D to TPX2, ID46 copy and 90 eeprom application ...etc ).
type 46 copy is on eletronic head and you need the car to do this job .
cj
Last edited by cjawahir; 25th July, 2010 at 10:10 PM.
you can buy an extra unit for the zedbul - around 650 euro ( internal board for zedbull) that allow copy of 4d to TPX2 as a stand alone unit- no internet needed. i believe zedbull wll bring a Z4D transponder out soon and you can copy onto these as well. time with the internal board module is also much quicker to copy.
another way would be with the tex cloning cd's. when reading a 4d key you need page 4 info to copy the key. page 4 is the secret code that gets calculated. if you can figure out page 4 info with the cd's then you can write the 4d manually using the zedbull ( not sure if clone will work). picture attached to write to tpx-2 . it starts from top and will be page 1, 2, 3 ,4 (secret key)
Last edited by drivesure; 26th July, 2010 at 08:46 PM.
Hi again,
Today I got this Zed-BULL setup. Version is v7.0.1
Does this software version works with the china clone hardware version ?????????????
Can somebody help in this matter?
Regards,G
Last edited by gopelhu; 5th August, 2010 at 09:15 PM.
semga (16th November, 2017)
Can autolockmasters or someone else just confirm the eeprom functions are working on clone zed bull, before i blow my hard earned cash.
Much thanks in advance as always.
You need every tool in the book, to do this auto locksmith job.
All.....
Today I received the CR2 key programmer and I tested it and works perfectly !!!!!!!
The CR2 can copy all 4D transponders into TPX2 or EH2 !!!!!!
It has 44 eeprom function. I tested all Fiat ID48,Philips Crypto and works 100%.
I bought CR2 key programmer from Vag-com,TachoPro,KWP2000,BMW Scanner,BMW Carsoft,MB Carsoft,ELM323,Code Reader,Can-bus
OBDMASTER....If you can please wait untill next week Tue. or Wed. because i will receive ZB clone programmer and I will testing all function and I will let you know the result.
I bought ZB clone programmer from CHEERY TECHNOLOGY LIMITED
I got the best price $550+$50 shipping charge= $600 + 5% PayPal fee so total = $630
This ZB works with IEA software.
Regards,G
can you upload software m8, that comes with codereader 2 so i can take a look m8.
and how much you pay for codereader 2?
thanks for your help m8
Last edited by obdmaster; 12th August, 2010 at 12:08 AM.
You need every tool in the book, to do this auto locksmith job.
Hi,
I can upload the CR2 software but it will not work because it needs USB hardware key and security card.
If you want it I can upload it.
I bought this CR2 from abdfactory for $450+$50 ship DHL+ 5% PayPal fee + $22 (because its price has gone up) so total = $547 , because the boss of obdfactory is a good friend of mine.
He gave me a lot of discounts.
Regards,G
Is the software for eeprom functions on code reader 2 the transporonics software re badged m8, with hitag and few others added?
You need every tool in the book, to do this auto locksmith job.
Hi,
Yes, CR2 contains 44 eeprom function and lot of crypto applications ( such as Hitag2,Texas DST, Megamos crypto...)
I uploaded some pictures on CR2 applications.
At ID46 reading you can see if the transponder is locked or not.
If is is locked it is marked RED.
If it is unlocked it is marked GREEN.
4D decoder needs min 2 max 11 minutes to find Pg4 decrypt data.
Regards,G
These pictures are the 4D decrypt solutions
And now I will tale you something funy...something that you didnt see...
Colect all your money spend on noworking,un-update,low quality,3 in 1 machines,frods from false salers....
And you will see that you lose twice more money then worth the original,nervous,lost time and bad service to the costumers,wondering what to do without support...
I findout this when I buy my third T-300
Its a basic rule "Niggard pay double"
No needs for THANKS button,its a free advice
Dont worry wont be hitting the "thanks button", as for the t300 yes they are low quality clone, if you wanted the same but good quality, should of paid the extra $20, and bought an MVP clone. I have one my friend who has ad100pro original has one also.Never let us down, both of us swear by them, absolute bargain.
This thread is talking about ZED BULL clone and code reader 2, which you obviously know nothin about . So goodbye m8.
You need every tool in the book, to do this auto locksmith job.
Bookmarks