Zed-Bull clone users, look here!

**mikajna** · 24th September, 2015, 11:17 AM

Here you go guys, but no one can tell me may I update my zed bull with any ZBC file, because I saw that some zbc have serial number, which is not like my zed bull...can I make problem if update with zbc which contain different serial number?

**ivaylomezdra** · 16th January, 2016, 10:56 PM

I have a mini zed bull with software 5.08 below. He wrote my card 0 tokens will DS2432 chip but I bought one and want to ask someone if dump files for him to share them and also how I can Fix problem 0 tokens also began to give the device is not recognized as a disconnect and connect with usb cable is displayed on the port and it is turned on and connect it gives device is not connected

This is my pcb. IMG-1452692343962-V.jpg

I bought chips from this picture 3.4 and 5 and soldered them on my but I need to dump DS chip

**whiskeyman** · 17th January, 2016, 02:35 AM

better to buy full size zedbull
better board

**ivaylomezdra** · 17th January, 2016, 11:24 AM

I want repair my mini zed bull help me please

**gopelhu** · 17th January, 2016, 12:38 PM

Originally Posted by ivaylomezdra

I have a mini zed bull with software 5.08 below. He wrote my card 0 tokens will DS2432 chip but I bought one and want to ask someone if dump files for him to share them and also how I can Fix problem 0 tokens also began to give the device is not recognized as a disconnect and connect with usb cable is displayed on the port and it is turned on and connect it gives device is not connected

This is my pcb. IMG-1452692343962-V.jpg

I bought chips from this picture 3.4 and 5 and soldered them on my but I need to dump DS chip

Hi,

here are two zb ds2432 dumps, but you will see that are them cannot has a 8 bytes hasp in dumps.

regards, G

**MrSporty** · 17th January, 2016, 12:59 PM

..and unless you can edit the Atmega EEPROM, then your out of luck.

**ivaylomezdra** · 17th January, 2016, 01:56 PM

I have atmega chip and it is no token limit if added ds chip dump where he shared his colleague will be there in atmega chips recorded a serial number and ds chip in another record

**paul_12345** · 17th January, 2016, 02:31 PM

Originally Posted by ivaylomezdra

I have atmega chip and it is no token limit if added ds chip dump where he shared his colleague will be there in atmega chips recorded a serial number and ds chip in another record

I believe the DS chip is a SECURE memory chip with the serial hard coded into the chip. So you aren't going to get the contents of the chip or be able to change the serial number of it!

You either need to use the original chip and get update files from a Chinese seller to get the tokens or buy another unit.

**ivaylomezdra** · 17th January, 2016, 02:49 PM

How do I know whether mini zed bull with counter and limit tokens?

**ivaylomezdra** · 21st January, 2016, 02:03 AM

Can my serial number of mini zed bull be converted DS dump file to be with him sense to remodel your ds dump file with my serial number?

**chinajohn1** · 13th March, 2016, 07:35 AM

Does any one know the M dongle wiring????

**Raptor181** · 15th July, 2016, 06:30 PM

Hello,

I have Zed Bull and Error code: 3

Have any solution?

BR

**toha** · 3rd December, 2016, 04:37 PM

Greetings, dug up an old topic, but maybe someone else is interesting.
I was able to read eeprom closed atmega2561 zed bull.
It was possible to read through the game with a supply voltage, reducing , and at some point atmega surrendered, but only got to read eeprom area, flash is not given, but I think that,if managed eeprom, ie the ability to read flash ... and maybe someone out, I only gave direction ...
eeprom attach a file, maybe someone will be interesting to look at,
EEP_B38DFBAB47470031.rar