All-in-One

**AlOdin** · 2nd February, 2011, 10:03 AM

New mode has been added
- BMW EDIABAS: D-CAN (STD:OBD + CAN)

(Update your CANtieCAR with lastest firmware)

**michi84** · 2nd February, 2011, 10:05 AM

Any news about CAN VAG Cars?

**AlOdin** · 2nd February, 2011, 10:06 AM

Originally Posted by michi84

Any news about CAN VAG Cars?

VAG-Commander only

**michi84** · 2nd February, 2011, 10:12 AM

does it support can or just k line?
does it support measuring blocks of engine can?

**AlOdin** · 2nd February, 2011, 10:22 AM

Originally Posted by michi84

does it support can or just k line?
does it support measuring blocks of engine can?

both - K+CAN
it is supported different versions of sw... you can find description of sw in this forum
in discussion topics about VAG Commander

**Sleuth** · 3rd February, 2011, 05:28 PM

Thank you Kind Sir for D-Can ! Works Great ! Now I can do the E-70`s etc...

Regards,

**AlOdin** · 3rd February, 2011, 10:38 PM

Originally Posted by yorugualoco

So it's a multi interface emulator, ok but is it fully compatible with brand software like DIS,SSS,INPA,lexia etc?

is it safe for programming and upgrading software from ECUs, and modules?

yes, but for DIS,SSS,INPA only
with new D-CAN mode

**AlOdin** · 13th February, 2011, 04:26 AM

Originally Posted by AlOdin

New mode has been added
- BMW EDIABAS: D-CAN (STD:OBD + CAN)

(Update your CANtieCAR with lastest firmware)

Critical update !!!
bug fixed in BMW EDIABAS: D-CAN (STD:OBD + CAN) mode
it was appeared in the programming by WinKFP Tool
(Update your CANtieCAR with lastest firmware)

**mtechno** · 15th February, 2011, 09:21 PM

Where is the link to find this product or what is the manufactorers name & model so I may find it myself?

**AlOdin** · 15th February, 2011, 10:32 PM

Originally Posted by mtechno

Where is the link to find this product or what is the manufactorers name & model so I may find it myself?

in accordance with forum's rules - ask in private message please

**marginal** · 15th February, 2011, 10:42 PM

Hi AlOdin.

I sent your company an email asking if your device can read the SKC of the VAG cars and did not receive a reply.

**AlOdin** · 15th February, 2011, 10:48 PM

Originally Posted by marginal

Hi AlOdin.

I sent your company an email asking if your device can read the SKC of the VAG cars and did not receive a reply.

sorry, have not any decision

P.S. as for sw

**AlOdin** · 17th March, 2011, 05:47 PM

SD/MMC Card for large USB Storage up to 32GB has been supported

(Update your CANtieCAR with lastest firmware)

Notes:
- Upload newest firmware FIRSTLY
- Then you can to install SD/MMC Card in built-in connector (this is required unscrewing device...)
- Many modes would required to reinstall drivers

**AlOdin** · 28th March, 2011, 10:50 PM

New mode have been added
- BMW EDIABAS: JBE PT-CAN (STD:OBD + JBE CAN 500k)
- BMW EDIABAS: JBE K-CAN (STD:OBD + JBE CAN 100k)

(Update your CANtieCAR with lastest firmware)

**AlOdin** · 10th April, 2011, 10:23 PM

New mode has been added
- OpenPort v1.3 Universal (11:Vpp/Boot)

(Update your CANtieCAR with lastest firmware)
* It is recommended to upload firmware in Loopback mode

Thread: All-in-One

Thread Tools

Display

New mode: BMW EDIABAS: D-CAN (STD:OBD + CAN)

allinone

CANtieCAR: News - SD/MMC has been supported as USB-Flash Disk

Bookmarks

Bookmarks

Posting Permissions